Product Description
- CNC special models that make full use (computer numerical control) milling and craftsmanship!
- Implantation general of chisel, quite unlike the structure of the type that causes the eye, and build a serrated by cutting a groove in CNC milling. As a result of scraping the surface, the surface is we were able to obtain a very sophisticated good sharpness.
- Traditional file becomes poor escape of shavings become When Komu shoot chisel eye of bottom-shaped V, but becomes easy to clogging becomes wider obtained eye bottom rounded by the cutting of CNC milling Therefore, it is clogged difficult, it may look like clogged, you can easily remove it and pay with a brush, etc..
- Multiple eyes has cutting force, for single eye that finished in clean, result work efficiency will be much better.
- Strong stainless steel because it is material to the water, it can be washed, so that you can be working with always clean state.
- If you want to wash, the tracing lightly sand with a soap to finger, please flowed with water from dropping the oil. This will give you the chance to shiny the original way. After please keep taking the moisture with a towel.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 23.6 x 5.2 x 1.2 cm / 32g
Product Specifications
- Item code
- AL-K44
- JAN code
- 4562256111030
Purchase Information
This item is limited to 10 per household.