Product Description
- New release HO various institutions cab back parts for the car! ! Locomotive back part of your popularity in N gauge new appearance for the HO. Indoor cab back parts to further realize manner reproduce the brave figure will be released new.
- Installation is easy and safe. You can reproduce the back equipment as seen from the front and just stick to the light-shielding parts.
- Parts will have been cut by a laser, it is likely to stick. Please utilize all means your existing grade-up of the vehicle.
- Contents: EF510 cab back
- Was stuck Tsukekata:
(1) Remove the cab of the parts by removing the exceeding of each locomotive.
(2) seal and peel off carefully, and stick it on the part surface.
(3) it will return the beam finished the parts to the original position. So we have to make divided at the 1-position side and the second place side, please be careful in mounting. (High-voltage line is longer is the # 1 side)
(4) This is a complete re-assembled to restore.
- Use Material: resin adhesive sheet
※ We have produced a vehicle to reference but there is a part that is different from the actual vehicle.
※ damage such responsibility at the time of processing is I can not assume. Please note.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 12.4 x 7 x 0.2 cm / 3g
Product Specifications
- Item code
- 10182
- JAN code
- 4582342841825
Purchase Information
This item is limited to 50 per household.