This item is limited to 3 per household.
- Of the 152mm gun launcher drew attention by adopting the main gun is the M60A2 of the United States Army. It was developed as a successor to the M60A1 was active as the 1960s of main battle tanks, deployed from 1975 has been started. M60A1 and is characterized by being equipped with a nearly compact casting turret equipped with a 17.5 caliber 152mm gun launcher on the vehicle body in common.
- Filko Ford Inc. XM162E1 developed by including the Shireira antitank missiles, grenades, was possible firing of anti-tank grenades. In addition to we were attracted attention as a tank of a new era at the time by a combination of state-of-the-art optical equipment.
- Model innovative American tanks attracted attention as tanks, reproduce the M60A2 in 1/35 scale. Of course the turret of its unique shape, such as a lower body shape that follows from the M46 Patton, it is precisely modeled with finish length about 21cm.
- Lower body, the upper portion integrally molded respectively slide mold. Also firmly representation shape and casting of texture bottom rounded. Underbody that such suspension arm has been reproduced in other parts are finished with a three-dimensional feeling. Track roller tire portion of the wheel and the rubber is another part of, realistic finish, of course, paint is also convenient. The track has assembly adopted the DS track of handy belt type.
- Upper body is also not only its shape, the left and right fender and engine deck, rear portion of the vehicle body, such as a storage case on the fender, and increase the detail of finish in the delicate reproduction. Interest even with a distinctive turret shape model. Gun barrel of the 152mm gun launcher, in addition to the mantlet, Commanders cupola, storage rack and searchlights, such as that is provided in the rear, a fine reproduction will highlight a unique shape.
- Near future tanks appeared in the 1970s, a unique form of M60A2 is the presence plenty in the model.
- New mold
- Lower body, reproduced in casting each top in the slide mold
- Such as a suspension arm another part of
- Track roller is realistic tire portion of the wheel and the rubber is another part of finish
- Assembled on track to adopt the DS track of handy belt-type
- Distinctive turret shape beautifully reproduced
- 152mm gun launcher of the gun barrel, in addition to the mantlet, and equipped storage rack and search light in the rear also closely modeled
( This is a machine translation. Please allow for possible misinterpretations in the text. )