── automatic control at the station the movement of the train! Try to run a lot of favorite train on the same route!
- In a continuous departure station of Advance link system mounted, the movement of one of the vehicle is linked to other vehicle!
- Train one after another, stop-departure! Try to run a lot of favorite vehicle!
- Continuous departure station is the scene part of the station that functions with to run more than one vehicle in the same line.
- Automatic stop at the station when the vehicle is coming. When the next vehicle approaches the station, ahead of the vehicle departs automatically in turnover.
- In order to control the vehicle interval, it will be able to run a lot of the vehicle in the same line.
- LED signals are also attached, the stop-departure will produce even light.
- Since the continuous departure station can also be set up to match facing the two, you can use the continuous departure function in the double track.
- With auto sleep function in 5 minutes
- Plarail Advance dedicated scene parts
※ Plarail vehicle can not be used.
[Commodity content]
Continuous departure station body (1), only straight rail (1), signal parts (1), roof (long) (1), roof (short) (1), a private joint parts (2), consumer label (1) , manual (1)
[Each part Function Description]
- Vehicle sensor: it detects the approaching of the vehicle.
- Signal: according to the entry of the vehicle, will light up in red and blue. You can freely rotate.
- Switch
• Continuous departure mode: stop automatically when the vehicle comes to the station. Then, when the next vehicle enters the home, vehicle parked is automatic departure, the next vehicle will stop at the station.
And time departure mode: In addition to the continuous departure mode function, vehicle parked will depart on automatically when the lapse of a certain time. It performs automatic departure, even if the next vehicle enters. You can enjoy the automatic stop-automatic departure even one vehicle.
- Continuous departure corresponding lane: it supports the continuous departure function. Approach direction is only one direction.
- Normal driving lane: There is no continuous departure function. Both can also be run in the direction.
- Stopper: Advanced vehicle will stop.
- A private joint parts: By replace, you can change the orientation of the station of the joint.
- Special rails: This is the length of the straight rail 1 duty.
[Notes]
※ If you have to run more than one of the vehicle, there is a case where the vehicle each other close.
※ can not be used in the five-car train more long organization.
※ the vehicle to be traveling using a new battery, the speed difference is Please do not leave too much. If there is an extreme difference in speed, there is a possibility that the train come into contact with each other.
※ about 5 minutes, if there is no reaction to the sensor goes into sleep mode. If you play again, please OFF → ON the switch.
※ If you play with IR control vehicle, such as before and the curve entering the station, please play to control the speed. When the vehicle speed is too fast or too slow, there are times when the station is not working properly.
[Challenge a variety of how to use! ]
- Try to run a lot of the vehicle!
When you run a lot of the vehicle, it Woah is like the real thing!
- Challenge to double track layout!
Use the continuous departure station (single)] (sold separately), try to run a lot more vehicle in the multi-line continuous departure!
※ [Continuous departure station] requires two.
- Platform expansion!
It becomes like the real thing when combined with [counter equation station] (sold separately)!
( This is a machine translation. Please allow for possible misinterpretations in the text. )