Micro Hyper Cut Saw Easy Model 0.15 Super (Hobby Tool) - HobbySearch Hobby Tool Store

This item is limited to 10 per household.

- Ease of use blade thickness 0.15 mm in pursuit of, was made so that is also acceptable to the people who had been shunned and worry is to use a little too thin in the ultimate blade thickness 0.1 mm up to the tooth pitch 0.6 mm now 0.15 It is SUPER.
- Sharpness is in the same outstanding and until now, has realized the beautiful cross-section.
- The blade thickness increases the fairly stable feeling by using the modified 0.05 mm thick to 0.15 mm from 0.1 mm, you can do the work cut out without anxiety.
- You can be asked to be widely used until towards the beginning from the direction of professional grade.

- Tiny member that could not until now, wider use applications can be cut of fine member. And until cut promises a clean cutting surface.
- Cut width 0.15 mm ultra-thin, at the same 0.15 mm and width also the thickness of the saw cut by the clams without dressing, achieve a thin ultimate cutting width than the scribed line.
- Does not have any clams out, but is subjected to a special dressing that can go cut smoothly without clogging.

Item Size/Weight : 21.7 x 6.5 x 1 cm / 24g