Product Description

- Cut the circle by rotating the transparent disc with the cutter head set!

- A circle cutter that cuts a circle by rotating the transparent disc on which the cutter head is set.
- The structure of the cutter position is difficult to shift so that highly accurate circle cutting can be performed.
- Cutter head position can be adjusted flexibly, it is possible to clip circles and R of various sizes.
- With no needle in the center position, you can cut without drilling holes in the material.
- A bearing ball is set on the outer circumference of the transparent disk, and it rotates smoothly.
- Set the rubber material on the back of the main body. It is convenient to fix the material when working.

[Low Adhesive Cutting Mat Mini]
- The attached cutting mat is specially designed with weak adhesive applied to the surface. It can temporarily fix the material with moderate adhesion and it is very convenient for cutting work.
- Convenient guidelines for equally dividing circles are printed, and it is useful for odd cuts that are difficult to divide, such as 5 and 7.

[Product Material]
- Circle cutter body: ABS / acrylic / TPR etc.
- Blade: SUS420 / ABS
- Low adhesion mat mini: PP etc.

[size]
- Circle cutter body: Approximately 223 × 224 × 37 mm (Vertical × Horizontal × Height)
- Weak Adhesive Cutting Mat Mini: Approximately 240 x 240 mm (Thickness: About 3 mm)

[Cuttable size]
- Diameter 24 - 153 mm
- Thickness (approximate): 0.1 to 2.0 mm (depending on material)

[accessories]
- Weak adhesive cutting mat mini 1 piece / exclusive replacement blade 3 pieces

※ This product is a cutlery, please be careful handling.
* Please use the special blade for the blade of the cutter.
* Tools, materials, parts, etc. other than this product used for explanatory pictures are not included.



Item Size/Weight : 30 x 26 x 4.5 cm / 471g

Product Specifications

Item series

Hobby Tool

Item code

HT-219

JAN code

4943209382194

Purchase Information