── Convenient function-packed workbench where fine garbage is not cluttered !!
- It is a workstation that does not cluthe the work space with chips generated by the necessity during model making.
- By doing work such as gate cutting and filing on this, you can work without cluttering around.
- By placing a metal net on the top of the main unit and dropping chips and the like from the hole into the detachable tray inside, you can easily handle the garbage later.
- The lid part becomes a stand leaning up an assembly instruction etc, and it also helps to secure work space.
- A detachable nipper holder is attached, it can be mounted on the right side of the main body, and on the left and right sides of the main body upper surface are dented, it can be used as a temporary storage place of a bar tool such as a design knife and a bar file and a small part .
- When you feel at ease, work quickly, finish as soon as you finish, the brought in place changes to work space, a new model creator.
- The Pro model is a luxury version with built-in rechargeable battery, optional LED light and loupe attached.
- USB terminal for optional connection is added to both side surfaces of the main unit, and the loupe and LED can be freely attached and detached.
- Since a cap for terminal protection is included, protect the terminals when the option is not in use, such as from the entry of dust.
- It can be used even while charging while charging with the included USB cable or with the power removed.
- The color of the main body is changed from gray of the basic version to black.
[Working part] (common to Basic / Pro)
- The working plate is made of a thick and durable metal with a large number of holes opened, and small chips and shavings generated at the time of work can be dropped as it is.
- In addition, larger chips and spent paper file etc. can be dropped from the notch on the front side of the plate.
- The garbage collected in the detachable tray under the plate can be handled easily and collectively.
- Each part around the working plate can be removed and it can be cleaned easily, so you can use it beautifully at any time.
[Instruction Stand] (Basic / Pro Common)
- The lid part of the main body can be used as a stand to set up assembly instructions.
- By inserting instructions into the gap between the lid and the main body, it is possible to stand up with the instruction manual open, and it is possible to effectively utilize the limited working space.
[Dedicated cutter mat] (Basic / Pro common)
- It is a perfect size cutter mat for the main body, it also supports work like pushing parts and pushing it off, so it can be dropped from the net part as it is, so you can always use the mat on the clean.
- It is suitable for work that requires less space saving, such as cutting of masking tape because it can be removed and used as a single item.
[Nipper Holder] (Basic / Pro Common)
- By installing a detachable nipper holder on the right side, you can secure the storage place of the nipper at the time of work and place it in a fixed position, so avoiding troubles such as losing sight during work and increasing working efficiency. It corresponds to the model nipper that is generally on sale.
[LED light] (Pro only)
- Adjustable freely with LED light connected to flexible arm.
- Large size Three LEDs, the amount of light is also high, the hands will light up brightly.
- By aligning with the LED of the loupe internal organs, it surely illuminates your hand during delicate work.
- Connect to the USB terminal on the side of the Pro model and supply power.
[Loupe] (Pro only)
- LED lighting Built-in loupe to exert power in fine work. The magnification of the magnifying glass is about 3 to 5 times.
- Easy to handle with a thin, lightweight lens, since we are using plastic based materials, there is no worry that the lens will break even if you drop it by any chance.
- Since flexible arms are used, it is easy to adjust to a position that is easy to use.
- The power supply is supplied by connecting to the USB terminal on the side of the Pro model as well as the LED light.
[Built-in power supply] (Pro only)
- Loupe · 1000 mA battery is built in the main body for power supply to the LED light.
- Charging the built-in battery is done from the USB terminal on the back, and the remaining battery level can be confirmed at a glance with the indicator on the left side of the main body.
- USB cable with length 1 M is included for charging. (USB · AC adapter, mobile battery etc. are required separately)
- Workstation Basic
· Size: about 297 mm × 209 mm × 30 mm
· Material: PP (polypropylene)
- Workstation Pro
· Size: Body: Approximately 297 mm × 209 mm × 30 mm, Loupe: Approximately 135 mm × 96 mm × 7 mm, Arm part about 300 mm, LED light: Approximately 60 mm × 18 mm × 10 mm, Arm part about 300 mm
· Accessory: loupe × 1 LED light × 1 USB charging cable × 1, USB cap × 2
· Material: PP (polypropylene)
( This is a machine translation. Please allow for possible misinterpretations in the text. )