- Railway Hobidus 1:80 Kiha 40 It is an engine sound unit dedicated to kit. Electric knowledge and adjustment are unnecessary, and everyone can surely enjoy the sound. With ISV board to be inserted in the power car circuit to operate the sound from a lower speed.
- When installing this product, soldering of electrical wiring is necessary for the customer's own. We will operate if physical installation space and two electrical connections can be secured. Please also purchase the body part etc separately.
- Required tools: Precision screwdriver (plus), tweezers
[Product Guide]
- Railway Hobidas Original Platkit [National Railway Kiha 40 2000 Number] This is a handy sound unit of a new sense.
- Enjoy with ordinary analog type power packs!
- Basic organization when using sound unit
Power car (with ISV board installed) + Trailer car (with sound unit installed)
* Sound unit loading on a powered car can not be done basically.
* The ISV board can be mounted without power to the power unit (improved product) for Kiha 40.
[Features of this product]
- No special equipment is required on the ground side (power pack, rail). You can enjoy it with your analog operation power pack.
- Idling sound when stopping, acceleration engine sound at departure, direct coupled engine sound at cruising, decelerating sound at stop, etc. can be enjoyed in conjunction with power pack operation (in case of pulse type power pack, deceleration sound It may not be possible to reproduce)
- There is no particular restriction on mixing with other existing products.
- It is also possible to install to other company's products. Because it is a unit with a very simple idea, there are restrictions on what you can do, and how to use is also very easy!
[Kiha 40 engine sound unit (without floor plate)]
- Except for epoxy floor boards, screws and spacers from the above products, the sound unit body and [ISV board] are set as a set.
- It can be applied when installing to another company's Kiha 40, or when installing it on the inner side of a motorized vehicle of Kiha 40 made by railroad Hobidas.
- Soldering is necessary for electrical connection, but if it can be done with physical mounting, simple electrical connection will work.
- Note that this product can not be installed on the existing [T-car unit for Kiha 40] (both initial product and improved product) (because it does not have a dedicated connector).
[ISV board]
- [ISV] is the meaning of [Increase Starting Voltage], that is, [raising the starting voltage].
- Because this start unit voltage of this sound unit is higher than the motor if it is intact, it was impossible to operate the sound when stopped.
- The voltage input to the motor is lowered by inserting this [ISV board] into the motor circuit of the motor car there.
- This will pseudo raise the starting voltage of the motor.
- Depending on the application, it is also applicable to other companies' products and self-made vehicles, and in particular it can be expected to have the effect of lighting the light at the time of stoppage (Please try at individual customer's product at your own risk).
- Only two electrical connections can be selected, and the voltage drop effect can be selected from two stages.
- This product is [Kiha 40 Power Unit (Improvement Item)] [18 m Class Intermediate Car T-Car Unit + Motorized Kit] [Fuji Express 1000 Series Power Unit] [Hankyu 8000 Series T Car Unit + Powering Kit ] [T-car unit for Moha 80 + motorized kit], it can be installed without machining.
- [Kiha 40 Power Unit (Before Improvement)] [Kei 5000 Series Power Unit] and other power units on the market can be used as long as soldering and physical attachment of wiring is possible.
( This is a machine translation. Please allow for possible misinterpretations in the text. )