Product Description
- It will be a hut that was mainly producing sand for anti-slip steam locomotives used.
- The sand which was carried by freight car etc. was baked inside the cabin, dried, sent out to the sand tower via compressed air via piping.
- The kit uses a plastic pipe in the chimney pipe part, but everything else is paper.
- It becomes a kit similar to Advance conventional product which cut laser color hard paper.
- It can be used in combination with [2006 Sediment Tower] which is on sale well.
- Craft bonds or woodwork bonds are required for assembly.
- When combining with a sand tower, please prepare 2 mm pipe as pressure feed pipe.
※ I am painting · weathering in example photos.
※ Can be used in conjunction with No.2006 sand tower sold separately.
- Size:
- Body: About width 162 × depth 72 × height 71 mm (not including a chimney tower)
· Sand storage area: approximately width 72 × depth 72 × height 6 mm
- It can be assembled with high accuracy by adhesion which bonds to the bonding surface and adhesion which combines unevenness.
- Required for assembly:
·tweezers
· Design Knife
· Cutter mat
· Craft bond
· Rubber bond
- Target age: 15 years old and over
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 25.8 x 15.8 x 2.6 cm / 161g
Product Specifications
- Item code
- 2007
- JAN code
- 4582439970926
Purchase Information
This item is limited to 12 per household.