Product Description
With liquid drip prevention cap · Because it is self-standing type, it can be used immediately even if the liquid becomes less.
Because the UV light part is covered, ultraviolet rays gather and the eye is also hard to hurt.
The tip is thin and easy to work.
- Use
Hobby of plastic, metal, wood, stone, brick, glass, ceramic etc, adhesion, repair, molding, repair of household goods, repair of electrical products, plastic model making, shaping, DIY, spare forming of plastics, accessory repair, Water leakage repair of pipe etc.
※ What can not be used
· Polyethylene (food container etc)
· Polypropylene (CD cases etc)
· Fluororesin (Teflon)
·silicon
Rubber
· Styrofoam
· Repair of dishes
- how to use
1. Wipe off the dirt on the adhesive surface and clean it.
Also, in order to increase the adhesion strength, please coarsen the file with a file of adhesive.
2. Please apply the glue to the part to be joined.
Please secure the part that can be irradiated because it will not solidify unless it is exposed to ultraviolet rays.
3. Move the attached light switch and light it up and irradiate UV light for about 5 seconds to 10 seconds to cure.
4. After curing, processing is possible (cutting, drilling, polishing, painting)
It is also possible to overcoat
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 21.2 x 9.6 x 3 cm / 41g
Product Specifications
- Item code
- HUG5001
- JAN code
- 4582170846863
Purchase Information
This item is limited to 10 per household.