- Recommended parts for sensors and lens parts of mechanical models, custom figures and so on.
- Hemispherical glass with its color adjusted for modeling is a custom made item polarized coated.
- Since there is no part corresponding to the gate of the injection molded part, it is unnecessary to cut out.
- There is no need to worry about cracking when cutting out and repair after the gate.
- For cement, cemedine [model high grade] is recommended.
- Be careful not to scratch the coating on the surface.
- It is unsuitable for painting.
- Also, please note that it is not a hollow part.
- Size notation: Diameter
- Size Variation: There are variations in shape and size due to glass molded items from 1 mm in diameter to 6 mm in diameter.
- The color also varies with the thickness of the glass, so you can see the colors are different even with the same color name. The smaller the size, the thinner the thickness, the thinner the color.
[Number of contents]
- S 1.0 mm 1.5 mm 2.0 mm 2.5 mm each 3 pieces - total of 12 pieces
- M 3.0 mm 3.5 mm 4.0 mm each 3 Total 9 pieces
- L 5.0 mm 6.0 mm 2 each - Total 4 pieces
( This is a machine translation. Please allow for possible misinterpretations in the text. )