This item is limited to 3 per household.
- Wheel cover to tighten your feet is a new mold!
[About actual vehicle]
- E series, the popular full size van produced by American Ford known as the club wagon is the E series.
- The first model appeared in 1961.
- It was mainly used for commercial use, and it got to gather stable popularity.
- 1977 model is the third generation model which was fully remodeled in 1975.
- The 3rd generation vehicle was a feature which adopted the body on frame structure.
- This structure was applied not only to Econoline but also to ambulances, various kinds of trucks and buses, which became the basis of the new generation of vehicles.
- Adopt the front layout as with the second generation like the engine mounting position. As a result, the same mechanism as the F series track was loaded in the drive train.
- Only 3 door bodies are prepared for the body.
- The engine has a lineup of in-line 6 cylinders and V-type 8 cylinders with various displacement from 3.9 liters to 7.5 liters.
- Full-sized capacity and heavy-duty chassis etc are widely popular for car fans as a custom base as well.
[About the model]
- The model is a plastic model assembly kit that reproduces a cruising van of the Econoline series popular as Ford's full size van on 1/25 scale.
- Among them, I model the 1977 model belonging to the third generation.
- The chassis to attach the floor pan to the ladder frame is reproduced as well as the actual car.
- We also model the front and rear suspension and the mechanism of the drive train firmly.
- And the engine is equipped with a V type 8 cylinder at the front.
- The finish can be seen from the hood which can be reproduced even to the auxiliary equipment and can be removed even after completion.
- Body accurately models third generation style.
- A circular window is reproduced at the rear of the side panel.
- Large format decal sheets are also set, and colorful stripes etc. will produce the finish of the body.
- Of course the interior is also modeled finely, such as driver's seat. Dashboards and sheets, etc. Reality is sufficient.
- In addition, prepare a fire stone tire with printed logo etc at your feet.
- Tighten with the new metal mold wheel cover.
- It is one that I am looking forward to trying to customize.
[Major features]
- 1977 model belonging to third generation of cruising van of the Econoline series popular as Ford's full size van on the 1/25 scale is reproduced
- New wheel mold cover that tightens your feet
- Reproduce the chassis attaching the floor pan to the ladder frame as well as the actual car
- Firmly modeling the mechanisms of front and rear suspension and drive train
- The engine that fits in a removable bonnet even after completion has V type 8 cylinder mounted on the front, reproduces to auxiliary equipment
- Body accurately models third generation style
- Reproduce a circular window at the rear of the side panel
- Large format decal sheet is also set, reproduces colorful stripes and so on
- Modeling interior finely, such as driver's seat
- Firestone tire printed logo etc.
( This is a machine translation. Please allow for possible misinterpretations in the text. )