This item is limited to 10 per household.
── New file from the Plamo Improvement Committee!
- New sense! Stone type polishing stick file.
- In addition to the shape and hardness of the bar file, it is a polishing file dedicated to a new model of a stone type plastic model that can be finished like paper file.
[How to use is up to you! It's a stick-type file with high degree of freedom of use! ]
- Because the whole stick is a file it can be used without waste in its entirety.
- You can use it freely according to various scenes without worrying about cutting direction and dominant hand.
- Moreover, since cutting power is lower than conventional metal file and eyes are fine, correction time can be reduced when accidentally scraping parts.
[Great success in detailed work such as gate processing and surface composition! ]
(1) Gate processing
· Because it is a thin stick-shaped body, small turns are beneficial, so it is possible to minimize scratches to the surroundings and concentrate on gate processing.
(2) Parting line · erase eyes
· By making use of the hardness and edge part of Jasiklice ZERO, it is possible to easily handle parting lines and matching eraser.
(3) Surface treatment
· It plays an active part in the plane processing of parts, C surface, surface processing such as edge finishing.
※ After using this product, please finish the parts surface with a sponge file or paper file with a higher count.
[It can be used according to the purpose with a file of roughness of the seed! ]
- Three types of file with roughness are set, so you can choose properly according to the application.
· HARD (count / about # 240 ~ 400) · gate processing · surface composition · edge placement etc.
· MIDDLE (count / about # 600) ... gate processing · parting line erase etc.
· SOFT (count / about # 800 ~ 1,000) ... finishing of parts surface · parting line erasing · shaping etc.
※ The finish may differ due to the power adjustment etc during cutting.
[Scrape residue is hard to come out and easy to clean! ]
- Many of the shavings that emerge during operation adhere to the main body, so scrape scattered in the air is reduced, and soils in the workplace are suppressed.
- Also, when cleaning, you can wipe the dirty part with a cloth, or by removing gum with a gum tape, etc., you can use it long without cutting power.
※ In case of edge part shavings can not adhere to the main body.
※ Please understand that kernels clogged in the back of the main unit can not be taken.
[Special holder also convenient during storage! ]
- Dedicated holder designed according to Jaslikus ZERO.
- Easy installation just inserting a file stick and stopping the stopper.
- It is possible to keep damages such as losing and breaking because it can be kept while storing the file with the file after it finishes using as well as wearing it when installing it, it can be prevented.
※ Please note that it may break if you use excessive force when using. Even if it should break, you can use it as it is.
※ This product is specialized in fine work such as gate processing and parting line erasing, so it is not suitable for work on large surface.
※ This product suppresses scattering scraping, please note that it can not be completely eliminated.
※ Although this product can be used with water sharpening, it may be difficult to remove scum that adheres to the file, the cutting power of the product may fall.
Also, please clean the water after sharpening, please remove the adhered residue after drying the body thoroughly.
( This is a machine translation. Please allow for possible misinterpretations in the text. )