- Field batting equipment of field specialist [Long Nose] is 1/72 the first three-dimensionalization!
- 87 Following the formula self-propelled aircraft gun, practical cars are thoroughly studied and fully commercialized with a new mold.
- The 75-type self-propelled 155 mm howitzer equipped in the field specialist has become inferior to the FH-70 equipped with the shortage of the range and later on from the development, and in 1987 the self-propelled self- 15 Research and development of this car that should succeed to garment started.
- The car body is based on the 89 type armored fighting vehicle based on the extended body length, has a style with a large turret.
- The main gun is equipped with a 52-caliber 155 mm howitzer with a multi-purpose muzzle brake, the range is 30 km, it can be loaded without choosing any elevation by an automatic loading device, enabling shooting more than 18 shots in 3 minutes.
- There is also a characteristic that it has a system that connects with a 99 type ammunition supply bullet as a feed bullet from outside of the vehicle and has a system that automatically supplies refueling promptly.
- 75 Self-propelled gun whose self-propelled artillery is procured from 1999 as a domestically produced gun following the 15 self-propelled self-propelled grenades, deployment proceeds mainly around units in the northern region, and more than 130 cars are procured and deployed.
- A series that is easy to make on 1/72 scale and is also ideal for collection.
- While mini-scale, realistic modeling is reproduced by geometry design, precision surface representation which is not inferior to 1/35 scale.
- Following the previous 87 model self-propelled aircraft cannon, high-quality panel lines, full of non-slip expression etc. are packed.
- The included decals contain vehicles that are actually deployed with well-documented content such as their troops and vehicle numbers.
[Specifiable specification designed such as movable parts and selected parts while keeping the number of parts. ]
- The turret can swivel 360 degrees, the gun barrel can be elevated to 57 degrees. ~ You can reproduce the shooting figure to the side which is one of the features of the actual car.
- The car body and turret are each designed to adopt a slide mold and not to omit the shape, to pursue easiness of integration of parts.
- Gun barrel is molded in one piece and 155 mm gun muzzle is real out.
- Each hatch can be opened and closed. Top of turret (right) Hatch rotates with each gun.
- Difference in the position of gun suspension between Northern troops and special teaching units is also reproducible.
- The traveling clamp that fixes the gun barrel at the time of movement can select the fixed state and the released state.
- Crawler track is a plastic part with 4 piece construction on one side and rubber pad is not equipped. ~ Easy to make, easy to paint and not to omit the shape ~
[Design expression by thorough research. ]
- Reproduce the turret rotation lock mechanism on the bottom of the turret (right) and the upper surface (left) of the car body by sculpture.
- Three-dimensional non-simple shape composed of chamfered inclined surfaces and vertical surfaces of the car body side turret ring.
- Reproduce the irregular expression on the bottom of the turret rear.
- On the corner of the car body at the back of the upper crawler, there are ribs of different length / position on the left and right, expressing without omitting.
[1/72 level reproduction of 1/35 level]
- The anti-skid on the car body and turret top is realistically expressed with fine rough sculpture.
- The shape and position of the anti-skid are set without misalignment with the real vehicle.
- The mesh of the engine system is three-dimensionalized with high-grade sculpture. ~ Delicate appearance without even a smiley ~
- Bolts applied to each panel etc are after parts and precise expression of ultra-fine size not requiring exchange processing.
[Selected parts according to specifications]
- Prepare the initial speed measuring instruments equipped on the gun barrels in separate parts when more precise shooting is required.
- Prepare anchor chain (with rubber hose) to fix the hatch so that it does not close suddenly.
- Turret top / The left storage box can be selected and installed.
[Attached decal / assembly manual]
- The decal contains evenly distributed vehicles deployed in each corner deployed in the country.
- All vehicle numbers are real ones, combinations with department notations belonging to them are also described in the instruction sheet, so no survey is necessary.
- Recording forces such as [Special Epistle 3] [2 Special] [5 Special] [7 Special] [11 Special] [Buddhist] etc.
- Molding color is gray and transparent part is clear.
- Number of parts: 105 points + 2 points (bonus parts) = 107 points.
- Completion size 170 mm (including barrel) x 45 mm x 46 mm (until closed hatch)
( This is a machine translation. Please allow for possible misinterpretations in the text. )