Product Description
- A self-propelled heavy gun with a large force with a total length of more than 30 cm when completed appears as a 4 in 1 kit!
- Rolling wheel 11 wheel (late model) type reproduced!
- Tall, Tsui, Loki (long / short barrel) can be selected and assembled !!
- 6 German figures figures are included as a bonus !!
[About actual vehicle]
- German large-size self-propelled gun that started to develop from 1936 is curl.
- It was a weapon aimed at the capture of the Magino line, a Fortress built by France in the advance of France.
- A gun that reaches 60 cm in diameter is characterized by having a unique dimension that the gun length is only about 5 m.
- It is said that cannon balls with a range of about 7000 m and a weight of about 2 tons were able to crush 2.5 m thick concrete.
- The car body equipped with this gigantic mortar is made of soft iron, the engine is equipped with Benz V type 12 cylinder, 580 horsepower diesel engine.
- From 1940 to 41, seven including prototype 1 both were made, but we also produced a type equipped with a 54 cm gun that reduced caliber and stretched cannon to extend range.
- 60 cm gun mounted type is called Gerrat 040, 54 cm gun mounted type is called Gerrat 041, cannon was exchanged and mounted on the same car body, it was possible to install.
- Improvement was continued, such as the wheelchair originally increased to 8 wheels from 3 cars to 11 wheels.
- We could not make it in time for the invasion of France and deployed in 1941.
- He was active in Sevastopolitan strategy and warfare against Warsaw.
[About the model]
- The model reproduces the German army self-running canker curl of World War II on 1/35 scale.
- The total length of the finish is a large kit that will be over 30 cm.
- Kit reproduces the wheel type 11 wheel from No. 3 car.
- In addition, the main gun prepared both 60 cm guns and 54 cm guns.
- Including Loki of car No. 5, Ziu and Tar decals set. Selected and assembled.
- The body can also be assembled by selecting either the state at the time of shooting at which the body was set up by raising the suspension, or the moving state in which the body was lifted by lowering the suspension.
- The gun barrel of the protagonist is reproduced by splitting left and right. Lifelings are also represented on the inside of the gun barrel.
- Of course the details around the gun are also mechanical. In addition, the large ammunition loading tray assembly located behind the recoil system is also reproduced in detail to enhance the sense of density of the finish.
- The crawler belt adopts a partly integrated linkage assembly type.
- The body that reproduced the driver's seat, the railings, the ramps, etc. was also finished with a presence presence in the delicate.
- In addition, this kit also sets 6 figures of German soldiers who operate this huge self-propelled gun as a bonus. I express that size in full.
- Please enjoy modeling force of large self-running guns.
[Major features]
- German army self-running mortar curl in World War II reproduced on 1/35 scale
- Reproduce type 11 wheel (late type) roller wheels
- [Tor (Thor)] [Ziu] (Loki length / short barrel) can be selected and assembled
- 6 German soldiers who operate this huge self-propelled gun as a bonus set 6 bodies
- The car body can also be assembled by selecting either the state at the time of shooting at which the vehicle body was set up by raising the suspension, the state of movement in which the vehicle body was lifted by lowering the suspension
- Detail around the gun and the large cannonball loading tray assembly located behind the recoil system are also reproduced in detail
- Both 60cm guns and 54cm guns are prepared for main gun
- Gun gun barrel is reproduced with left and right split, lifework on inner barrel
- Caterpillar adopts a partially integrated coupling assembly type
- Car body delicately reproduces driver 's seat, handrail, ramp, etc
- Size at completion: Over 300 mm in total length
※ It is an assembly kit. Please read the instructions carefully for assembly and work on it.
* Assembling of the kit requires a tool such as a cutter and a nipper and an adhesive exclusive for the plastic model.
※ For paint finishing please use paint exclusive for plastic model.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 53.2 x 33 x 10.4 cm / 1481g
Product Specifications
- Item code
- DR6946
- JAN code
- 0089195869463
Purchase Information
This item is limited to 3 per household.