1/80(HO) Sanyo Electric Railway Series 3000 Kit Top Number Three Car Set (3-Car Unassembled Kit) (Model Train) - HobbySearch Model Train HO/Z Store

This item is limited to 20 per household.

Copyright Sanyo Electric Railway Co.,Ltd.

[ Related Products ]
- 1/80(HO) KW-1 Bogie Frame (for 1-Car)
- 1/80(HO) Center Pin for Metal Floor Board (Chassis) for 1-Car(2pair)
- 1/80(HO) NS Drive Unit NSA-10.5P Diameter 10.5 Plate Wheel A Type (for 1-Car/2 Unit set) (Power Unit) (Unassembled Kit)
- 1/80(HO) NS Drive Unit NSB-10.5P Diameter 10.5 Double Motor Plate Wheel B Type (for 1-Car/2 Unit set) (Power Unit) (Unassembled Kit)
- 1/80(HO) Pantograph Type PT42 Flat Shoe (Silver) Dimensions:14x16 (1pc.)
- 1/80(HO) Pantograph Type PT42 Flat Shoe (Gray) Dimensions:14x16 (1pc.)
- 1/80(HO) Pantograph Type PT42 Flat Shoe (Black) Dimensions:14x16 (1pc.)
- 1/80(HO) ACE Coupling II (Grey) (2pcs.)
- 1/80(HO) ACE Coupling II (Long/Grey) (2pcs.)
- 1/80(HO) (NEW) Bace for ACE Coupling (2pcs. for 1-Car)

-Masterpiece 16 series

[About the prototype]
-Sanyo Electric Railway Series 3000 trains are commuter trains, 70 of which were manufactured between 1964 and 1971.
-Three separate parts are manufactured, and since 1972 the cooling has been continued since the time of the new model 3050 and the expansion continues, and it is the representative vehicle of Sanyo Electric Railway which has finally become 148 cars in the whole series.
-There are minor differences in form due to the time of manufacture and subsequent modifications, and it is a headache when modeling.
-In this project, we made the prototype of the top number of the aluminum initial car as the first bullet, and the figure of the late year that was cooled and returned to 3 trains.
-Will be sold in a 3-car set.

[Kit Summary]
-It is the composition which combines the loss made front with a bent etching body.
-Rooftop equipment and underfloor equipment parts are all lost parts and white metal parts, all included in the kit.
-Bogie frame, wheels, power, pantographs, couplers not included.
-For power, use our company's NS drive unit etc.
-The pantograph is compatible with PT42 with mounting dimensions 14 x 16 mm.