This item is limited to 3 per household.
-Reproduce the structure in detail to the inside !!
-Moveable to enjoy after completion!
-Astonishing size, what about the total length of about 40 cm when completed!
[About Alison Engine]
-Alison manufactured many engines of aircraft operated by the US Army in World War II.
-Liquid-cooled V-type engines mounted on Lockheed P-38 and Curtiss P-40 are known.
-After the war, the United States Air Force's first practical jet fighter, the T-33 engine, and the J-33 were produced, thereby strengthening its position as an engine manufacturer.
-In addition to jet engines, various turboprop engines are also manufactured.
-The turboprop engine that turns the turbine by the pressure of the combustion gas and turns the propeller by the power extracted from its shaft is widely used not only for various aircrafts, but also for engines such as helicopters.
[About the model]
-A plastic model assembly kit that reproduces an American aircraft engine manufacturer, Allison's turboprop engine.
-The scale is 1/10 and the overall length of the finish is about 40 cm.
-The structure of one Allison turboprop engine is reproduced in detail.
-A total of 13 compression wheels with finely cut small fins, and turbine blades etc. are also made one by one.
-The shafts to which they are attached and the gears connected to them are also firmly modeled and can be moved after completion.
-You will be able to understand the mechanism while assembling it.
-Furthermore, the propeller attached to the tip of the engine reproduces the type of four blades.
-The blade reproduces only the root part, but the gears in the spinner are also modeled.
-A dedicated display stand is also available.
-This kit is for the Atlantis model to re-release the previous level kit.
[Major features]
-1/10 scale reproduction of US aircraft engine manufacturer, Allison's turboprop engine
-Giant model with a total length of approximately 40 cm when completed
-A detailed representation of the structure of one Allison turboprop engine to the inside
-Propeller mounted on the tip of the engine reproduces the type of 4 blades
-Accurately model the shaft to be attached and the gears connected to it
-Movable type to move and enjoy after completion
-The blade reproduces only the root part
-Model the gears inside the spinner
-Special display stand also available
-A total of 13 compression wheels with small fins finely cut in, and one turbine blade etc. as one part
( This is a machine translation. Please allow for possible misinterpretations in the text. )