This item is limited to 3 per household.
-Complete length about 50cm!
-The US Navy's first Aegis system equipped ship model!
-Decals are not only Ticonderoga but also four of the same type ship's name and ship number set!
-Ship name stand included for convenient display!
[About the real ship]
-The first cruiser equipped with the Aegis system in the US Navy is the Ticonderoga class.
-The first Ticonderoga-class first ship with a total of 27 ships, the nameship, was commissioned in 1983 as Ticonderoga.
-The ship uses a spruance class destroyer, and the engine is equipped with four General Electric LM2500 gas turbine engines.
-Launched in 1981 at the baptism of Nancy Reagan, with a drainage volume of 9,600 tons and a total length of 173 m.
-It became the first ship to commercialize the Aegis system as a US Navy ship, and its superior battle information processing ability, as well as air defense of the fleet, toma attack on the ground by Tomahawk, and also demonstrated its power to anti-sublimation introduction etc. is.
-Decommissioned after finishing a mission in the Caribbean in 2004.
[About the model]
-The model is a plastic model assembly kit that reproduces USS Ticonderoga CG-47, which has been active as an American missile cruiser, in 1/350 scale.
-The overall length of the finish is about 50 cm, expressing the appearance with plenty of presence.
-The hull is divided into left and right, and the shape of the bow is accurately reproduced.
-The hull upper structure mechanically models the bridge and masts.
-Also expresses hexagonal radars and the like equipped on the surface of the bridge.
-The surface detail of the upper structure is a unique finish of the large model and you can enjoy the unique expression of the Aegis ship.
-In addition, Mk.26 missile launcher and 5-inch single turret deployed on the ship's front and rear decks are also reproduced firmly.
-A display stand is also provided, and the name of Ticonderoga is expressed in three dimensions by relief.
-In addition, two ship-mounted helicopters are also set.
-In Decal, besides the CG-47 Ticonderoga, names and ship numbers for Yorktown, Vincens, Valley Forge and Thomas S. Gates are also available.
[Major features]
-Reproduce the USS Ticonderoga CG-47, active as an American missile cruiser, in 1/350 scale
-Accurately reproduce the shape of the bow
-The hull upper structure mechanically models the bridge part and the mast etc.
-Expresses hexagonal radars mounted on the wall of the bridge
-The surface detail of the upper structure is also a large model, the unique expression of Aegis
-Mk.26 missile launcher and 5-inch single turret deployed on the ship's front and rear decks are also reproduced firmly
-A display stand with a three-dimensional representation of the Ticonderoga's name is also available.
-Two ship-mounted helicopters are also set
-In addition to the Ticonderoga CG-47, the same type of Yorktown, Vincens, Valley Forge, Thomas S. Gates and names and ship numbers are also available for decals.
-Completed length: about 500mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )