This item is limited to 3 per household.
COCA-COLA, COKE, the Contour Bottle Design, the Dynamic Ribbon Device and Red Disc Icon are trademarks of The Coca-Cola Company. Coca-Cola graphics (C) 2019 The Coca-Cola Company.All rights reserved.
[About the car]
-The C-over model is a cab-over type medium-duty truck produced by Ford from 1957 to 1990. It was also used for fire trucks in various places, etc., and it gained high trust.
-Since 1963, there has been no major change in design, and it has been active in various places until the end of production in 1990. The model is made up of seven types from C-500 to C-900 depending on its size etc. One of them is C-600.
-Each engine is equipped with a gasoline engine. It had a lineup of 4.9-liter in-line 6 cylinders and V-type 8-cylinders with each displacement.
-In addition, various types of cargo beds were prepared, and they were used in various logistics.
[About the model]
-The model is a plastic model assembly kit that reproduces the Ford representative truck, C-600 in the C series in 1/25 scale.
-In this kit, model the Stake bed type on the rear bed. It reproduces with a full detail model reproduced in detail from an engine to a frame with 200 or more parts.
-The cab of distinctive design expresses its shape with an integral part. Of course, the details such as the front grille and the bumper also improve the finish.
-Furthermore, the room is also reproduced realistically such as dashboards and sheets. You can enjoy the tilt up after the cab is completed.
-The engine models a V-type 8-cylinder. It is also good to try to improve the details such as the reproduction of accessories. The chassis on which the engine is mounted is a reproduction that can also understand the structure, such as the frame shape and the front and rear suspension.
-Model firmly the shape of the Stakebed type where the board is assembled in the lattice on the frame of the rear. The kit also includes a Coca-Cola vending machine.
-Reproduce C-600 in Ford's leading truck, C series in 1/25 scale
-Model the Stake bed type on the rear bed part
-More than 200 parts
-Full detail model reproduced in detail from engine to frame
-Coca-Cola vending machine also set
-The cab of distinctive design expresses its shape with an integral part
-High details such as front grille and bumpers
-The room is also reproduced realistically such as dashboards and sheets
-The cab has a structure that allows you to enjoy tilting up
-Reproduction of accessories etc. is also recommended for detail up
-Engine models V-type 8-cylinder
-The chassis on which the engine is mounted reproduces the frame shape, front and back suspensions, etc.
-Firmly model the shape of the Stake bed type where the board is assembled in a lattice on the rear frame
( This is a machine translation. Please allow for possible misinterpretations in the text. )