[About the actual vehicle]
-The White Motor Company, which has been making various categories of vehicles since the age of steam cars, switched from car production to truck production after the end of World War I.
-During the Second World War, half trucks such as M2 and M3 were also produced.
-After the war, it became a manufacturer only for large trucks, acquired many truck manufacturers, and in 1951 was in charge of selling freight liners.
-White 3000COE has gained popularity with its characteristic cab design.
-Produced in the 1950s, towed various trailers and ran through the Americas.
[About the model]
-Kit is a plastic model assembly kit reproduced in 1/48 scale by combining the tractor head of the American White Motor Company active in the 1950s and a large tank trailer.
-This kit is a rerelease of Atlantis models that were released from the level in the 50s.
-You can easily work with a reduced number of parts.
-A cab-over type cabin with a unique design that draws a curve reproduces the style with plenty of atmosphere.
-The cab can be opened and closed, and the engine is also modeled below it.
-Represents leaf springs and powertrain on the chassis.
-And the tank trailer is connected to the rear. The body is divided into two parts, the top and bottom, the shape and details, the axle on the underside of the car body, etc., and the mechanical finish with the tractor head. When completed, the total length is about 25cm.
-In addition, 2 figures of workers in realistic poses for refueling work are also available. Enhance the display atmosphere.
-Marking reproduces the marking of Sinclair Oil, an American oil company established in 1916.
-Logo and dinosaur marks are available on the decal.
[Major features]
-In the 1950s, combined with the tractor head of the American White Motor Company and a large tank trailer, reproduced on 1/48 scale
-Atlantis model revives and released from what was released from the level in the 50s
-Parts configuration with fewer parts
-A cab-over type cabin with a unique design that draws a curve reproduces its style with plenty of atmosphere.
-The cab can be opened and closed, and the engine is modeled below it
-Represents leaf springs and powertrain in the chassis
-The tank trailer is connected to the rear part, and the main body is divided into upper and lower parts, modeling up to the shape and details, the axle on the bottom of the car body, etc.
-Two realistic pose workers are available for refueling.
-Marking reproduces the marking of Sinclair Oil, an American oil company established in 1916
-Logo and dinosaur mark available on decal
( This is a machine translation. Please allow for possible misinterpretations in the text. )