Product Description

[About the actual machine]
-Junkers Ju88 in Germany was put into operation in September 1939, and each type was used throughout the war.
-The aircraft pursued thorough aerodynamics to meet the demands of high-speed bombers, which are faster than fighters, and adopted a twin-engine engine.
-The engine is mainly equipped with a Yumo 211 V-type 12-cylinder liquid-cooled engine.
-It boasted high performance with a maximum speed of 470km / h.
-Ju88 was the main bomber of the German Air Force until the end of the war, but various variants were created due to its high speed performance.
-One of them is G type and was developed as a night fighter type.
-Based on A-4 bomber type, G-6 is equipped with Junkers Jumo213A engine.
-Also equipped with FuG218`Neptun` or FuG200 series radar.

[About kit]
-Reproduce the Junkers Ju88G-6 type, a night fighter deployed by the German army in WWII, on a 1/48 scale.
-The shape of the smart aircraft pursuing speed accurately reproduces the figure with the gondola on the underside of the nose removed, and firmly suppresses the characteristics of the G-6 type, such as the nose shape equipped with a radar antenna. Modeling.
-The finished length is about 30cm. The nose part has four antenna parts reproduced to create a unique look.
-The body is divided into left and right parts, and the wings are divided into left and right parts.
-Panel lines are also delicately expressed.
-The two engine nacelles on the left and right sides have ample atmosphere, such as radiators and side exhaust pipes, as well as shapes.
-In addition, the cockpit also has a detailed detail and you can see the finish from the canopy.
-In addition, the main landing gear and tail wheel can be mechanically finished to the pillars and inside the leg storage.
-It would be fun to swing your arms for more detail.
-A model that cannot be overlooked only in the field.

[Major features]
-Reproduce the Junkers Ju88G-6 type, a night fighter deployed by the German army in WWII, on a 1/48 scale
-Four nose parts are reproduced on the nose, creating a unique look.
-General reproduction of the aircraft divided into left and right, the wings divided into upper and lower parts respectively
-In addition to the shape of the two engine nacelles on the left and right, sufficient atmosphere such as radiators and side exhaust pipes peeking from the tip
-The cockpit also has detailed details and you can see the finish from the canopy.
-You can enjoy the mechanical finish of the main landing gear and tail wheel all the way to the inside of the pillars and leg storage.
-Finished length is about 30cm


Item Size : 42 x 27 x 8 cm

Product Specifications

Country

Germany

Item code

DR5509

JAN code

4545782062304

Purchase Information