Product Description

--Improved accuracy and upgraded! Precision R cutting tool
――This R-V6 enables precise inner and outer R surface cutting, which was difficult until now.
――The inner and outer R surfaces can be cut, and fine R can be taken.

--The saw craftsman uses 0.5 mm thick steel (hagane) and has finely cut 10 microns (10 microns is 1/100 mm) on each R convex part and both sides of the entire circumference. .. Actually, the thickness is about 0.48 mm.
――There are 6 types of R convex part processing, you can cut the R part according to the object, the parting line is erased regardless of the fine inside or outside, the deep groove processing of the figure R part, the inside of the cylinder Ideal for various types of modeling such as thinning. There are various ways to use it.
――In addition, since there is a 90 degree angle in one place, you can make an accurate right angle.

--Material: High carbon special blade steel
--Body thickness: Approximately 0.48mm
--Size: Outer diameter (approx.) 60mm Inner diameter (approx.) 25mm
--Surface treatment: 3.0 micron nickel plating
--R convex blade attachment: Saw craftsman's hand technique
--Blade: 0.01mm on both sides
--Application: Cutting of resins


Item Size/Weight : 21.8 x 10.8 x 0.1 cm / 13g

Product Specifications

Item series

Shokunin Katagi

Item code

AL-K139

JAN code

4562256112334

Purchase Information