[C007 section power changeover switch specifications]
--RC-02 / RC-03 This is a switch that switches the power supply of two sections on the same line that are isolated and separated by one train controller.
--Output for 2 sections from the switch, # 1 section operates according to the operation of the connected train controller, # 2 section can switch between the operation of the controller or the stop with the light always on (or off) with the switch I will. (Figure 1)
-While the vehicle is stopped in the # 2 section, you can select the direction of travel of the lights. You can switch the direction of the headlight and taillight.
--It is possible to switch between operation / stop of multiple sections using multiple switches. You can play like a car depot or a motive power depot. (Figure 2)
――Using 2 sections, you can play by connecting 2 trains with motors, respectively, just by operating the controller and switch.
――By combining with the [Uncoupler Rail with Gap (Tentative)] scheduled to be released in the future, you can reproduce the work of separating the two trains with motors.
--Can be used with either Z gauge or Z shorty.
--It is possible to connect existing switches such as C002 / C003 / C004 using the side hook.
--Section power changeover switch x 1
--Seal x 1
--Instruction manual x 1
* Depending on the layout used and how to play, the separately sold [A008 Narrow Feeder Cable] and [A013 Insulated Joiner] are required.
( This is a machine translation. Please allow for possible misinterpretations in the text. )