――The JB23 is an off-road four-wheel drive vehicle that has been sold for 20 years from the appearance of the 1st model in 1998 as the 3rd generation of Jimny to the 10th model.
――While the box-shaped style, which used to be a straight line, has been changed to a rounded shape, it follows the predecessor in terms of mechanism such as the rudder frame and rigid axle suspension, and has high off-road driving performance and on-road driving performance. Improvements have been made.
――The product is modeled on the final minor change car, the 10-inch.
--The product is a kit format that requires assembly. It is 1/24 scale.
--No painting required: Each part is colored with a molding color, and the body has a glossy texture that cannot be obtained by painting.
--No need to bond: The design specifications that fit the parts together make it easy to assemble.
――The product is based on the special specification car Land Venture of the JB23 series 10 type that was released in 2014.
--This is a late model with a thicker bonnet, equipped with the side garnish and rear tire cover that are characteristic of LV.
――The size unique to 1/24 scale accurately reproduces detailed modeling.
――The body uses a special molding material to reproduce a level of luster that is difficult to express by painting.
--The molding color consists of eight types: green, black, silver, gloss silver, clear smoke, clear, clear red, and clear orange.
――Visuals that look like they are painted separately by colored parts even in straight assembly, parts division that greatly reduces masking work even in the case of painting
-The body is a box shape with a slide mold, reproducing the slightly rounded shape of the side.
――The front, rear and roof are the standard structure of the NEXT series, which is a car that is laminated and fitted to the body parts.
--The thicker 9/10 type bonnet and front side are available as separate parts.
-The bonnet intake reproduces the depth and is reproduced with separate parts.
――The front grille has a two-layer structure that reproduces the depth, and the radiator that fits in the back is also shaped.
――The lower part has a structure in which the ladder frame is a single part and incidental parts are attached.
--The leading arm, trading arm, front and rear differential gear cases and drive shaft are three-dimensionalized as separate parts.
――The headlight lens is delicately shaped like the actual car sculpture.
――The headlight unit reproduces the main light bulb and small light bulb with delicate engraving to make the back of the lens three-dimensional.
――The driver / passenger seat window has a separate design of glass and frame, eliminating the need for sticker coloring and masking during painting.
――The adhesive part (black part) of the side / rear window is expressed on the body side, and it is finished realistically by fitting the glass.
――The Defogger on the rear glass is delicately carved and expressed.
--The side turn lamps and back lights express the lens with clear parts. The turn lamp has a structure that fits from the back side.
-The lens with integrated brake / turn signal is reproduced with a non-adhesive type that fits the clear orange parts into the brake lens.
――The wiper blade is an ultra-fine molded part that gives you a sense of realism, and even the unevenness of the blade mounting part is engraved.
――The instrument panel is three-dimensional with delicate sculpture. The drive selection button type switch of JB23 is also accurately shaped.
--The side mirrors have a two-layer structure and are color-coded. The mirror surface is represented by the attached cutout wheel seal.
--The tires are made of rubber resin, and a special mold (new mold) is used. 175 / 80R16 size on-road tires are included.
--In the actual vehicle, an optional roof bar is available as a custom part. Adhesive type.
――The attached sticker reproduces the coloring of details, and it is already cut out and can be easily pasted.
――The sticker contains the instrument panel, logo, vehicle number, etc.
――The size at the time of completion is (approx.) Overall length 150 x overall width 77 x overall height 72 mm.
--111 assembled parts
[Attachments]
--Runner X18
--Rubber material tire X4
--Assembly manual X1
--Seal X1
( This is a machine translation. Please allow for possible misinterpretations in the text. )