This item is limited to 10 per household.
――This color line decal is a decal that can be attached to various surfaces with curved surface, uneven surface, wavefront, and acute angle surface.
――It is a color line decal that can be used in a wide range of ways, as long as it is a light curve, it can be pasted while gradually bending.
--Please use it for a wide range of purposes such as car models, motorcycle models, figures, miniatures, airplanes, robots, and accessory accents.
--Decal size Length 123mm Width 60mm
[Line width / number]
--0.1mm / 8 pieces
--0.2mm / 8 pieces
--0.3mm / 5 pieces
--0.4mm / 5 pieces
--0.5mm / 6 pieces
--1.0mm / 3 pieces
--1.5mm / 3 pieces
[How to paste]
1. Cut the line to be used with a ruler.
2. Peel off the transparent film of the cut decal.
* The side from which the transparent film is removed is the pasted printing side.
3. Peel off the printed surface from the mount.
4. Paste the printed surface to the part where you want to paste the line.
5. After the position is decided, lightly press it with your finger.
6. Use a fine brush on the decal to absorb water all over.
7. There is a thin paper on the decal. After soaking it in water, wait for about 30 seconds and slowly peel off the thin paper with tweezers. Thin paper can be peeled off cleanly.
8. Pasting is completed.
9. Dry the pasted printed surface without touching it.
* A clear coat can be applied after it has completely dried.
( This is a machine translation. Please allow for possible misinterpretations in the text. )