-It is [Porsche 911 (991) Carrera 4 GTS 2014] produced as a 1/43 scale handmade model car of [EIDOLON].
-This model is a faithful reproduction of the 911 (991) Carrera with a wide body, [Porsche 911 (991) Carrera 4 GT S].
[Vehicle commentary]
--Porsche 911 that appeared in 1964.
――While maintaining the identity of a horizontally opposed 6-cylinder engine mounted on the rear, independent round headlights, and a roofline that slopes toward the rear, it has continued to change with the times.
――The 991 type is the 7th generation and appeared in 2011.
――The wheelbase has been extended by 10 cm compared to the predecessor, and the body that seemed to be larger at first glance is actually made of various aluminum and lighter, and the displacement of the standard model has been downsized by 200 cc to improve fuel efficiency. It has been revamped.
――It is a promise of 911 that grades will be added at any time after the appearance, and in 2014, the GTS that was given an intermediate character between the sports model Carrera S and the hardcore GT3.
[Model explanation]
――Make Up has released various models of air-cooled generation (1st to 4th generation) and 997 generation Porsche 911 from both Vision and Idron brands, but starting with this GTS, the car body at the time of appearance We will start developing the lineup of the 991 series, which has attracted a lot of attention due to its weight reduction and engine downsizing.
――The body of 911 is a combination of curved surfaces with slow and fast movements, and it is important to accurately grasp it when modeling.
――This model accurately traces the 3D scan data of the actual vehicle to design the prototype.
――In addition, the interior, which tends to be unexpectedly rough, is designed based on the scan data of the actual vehicle, and the color tone and gloss of the paint are controlled to produce the texture of the leather and Alcantara of the actual vehicle.
――In modern cars, the reflectors and housings of the headlights and taillights have a very complicated design, but in order to make those expressions as close as possible to the actual car, we researched the actual car and made parts according to it. We are devising such as taking.
――And what catches the eye on the exterior of GTS is the sporty centerlock mesh wheel, but here we design the prototype data with 3D CAD, cut brass based on that data to make a prototype, and white it. By duplicating with metal casting, we reproduce a high-resolution and sharp design that pushes the limit of 1/43.
--EM629F: Carmine Red (Limited to 50 units)
--EM629G: Agate Gray Metallic (Limited to 50 units)
--EM629H: Black (limited to 50 units)
--EM629I: Mule Orange (Limited to 50)
--Material: Resin body, white metal parts, etched parts, aluminum sawn parts
--Acrylic base and clear case included
( This is a machine translation. Please allow for possible misinterpretations in the text. )