Product Description

-It is [Nissan Skyline GT-R (BNR32) (RS Watanabe 8-spoke wheel)] manufactured as a 1/43 scale handmade model car of [EIDOLON].
--A new variation has been added to the BNR32 GT-R, one of the standard makeup products.

[Vehicle commentary]
――At first glance, the skyline worships the dust behind European cars that look ordinary. At the All Japan Touring Car Championship (JTC), which was held in Japan from the mid-1980s under the Group A regulations, the `Skyline Myth` built during the Hakosuka era was fragile but about to collapse.
――The 8th generation Skyline (R32 type) was created by Nissan engineers who witnessed such a situation and to return the Skyline, which had become a high-soccer, to the original sports sedan route, and its image leader. It will be GT-R (BNR32) that has achieved a resurrection.
――The BNR32 was equipped with a full-time 4WD, 4WS, and a dedicated 2.6-liter twin-turbo engine, and the exterior was also given a dedicated wide body with 3 numbers.
――The success of the BNR32 in the race scene is one of the factors that created a situation where the GT-R is the strongest and the `GT-R's enemy is the GT-R`, and as a result, JTC is over. It was about to become.

[Model explanation]
――The prototype of the model is manufactured by 3D scanning and interviewing the actual vehicle in-house, paying attention to the unevenness of the press line and the fine radius of the sticking of the surface.
――We are aiming for objective modeling that is faithful to the actual vehicle with basic proportions.
――When modeling, it is important to pay attention to the reproduction of the complicated surface composition near the wheel arch part of the front fender, which tends to be simplified by all means.
――This time, the wheel is a classic Watanabe 8-spoke for Hakosuka and Kenmeri, and the image is a classic tuned specification with a mildly low down vehicle height.
――We are pursuing a `possible appearance as an actual vehicle` without increasing the diameter or deepening the rim of the wheel, aiming for a model look.
――For the wheels, the spokes are made of white metal, and the rims are made of aluminum with high roundness, and a mag wheel-like paint is applied on top of it.
――The vehicle itself is a modification of the standard car by the owner according to the limited car NISMO, equipped with rectangular ducts on both sides of the license plate in the front bumper, protectors on the side skirts, spoiler under the wing, and lip on the front end of the engine hood.
――Furthermore, the headlight is not a standard projector type, but a modified square halogen N1 light is reproduced.
-The addition of a diffuser under the lip spoiler painted in the same color as the body is also an original arrangement.

--EM424A: Gun Gray Metallic (Limited to 100 units)
--EM424B: Crystal White (Limited to 50 units)
--EM424C: Jet Silver Metallic (Limited to 50 units)
--EM424D: Red Pearl Metallic (Limited to 50 units)

--Material: Resin body, white metal parts, etched parts, aluminum sawn parts
--Acrylic base, clear case included


Item Size/Weight : 18 x 8.8 x 8 cm / 432g

• *[ Regarding the product image ] The image may differ to the actual product.

Product Specifications

Item series

Eidolon

Car Manufacturer

Nissan

Item code

EM424B

JAN code

4573433697964

Purchase Information