--Masterpiece 16 series
--Fuji Minobu Railway acquisition national railway series (1/80 16.5mm gauge metal kit)
[About the prototype]
――Fuji Minobu Railway was opened in 1919 by steam power between Fuji and Minobu, but from 1927 to 1928, electrification and extension sections were carried out, and 18 semi-steel trains were newly manufactured. ..
――After that, it was acquired and nationalized in 1941.
――After the war, after being used mainly in the northern part of the Iida Line, it was scrapped from 1956 to 1958, and 13 cars were transferred to private railways.
――In this project, we will commercialize a representative vehicle after the acquisition of the national railway and after the transfer of the private railway so that it can be reproduced with a model.
[JNR Moha 1200 type (former Fuji Minobu Railway Moha 100 type → Moha 93 type after acquisition in 1945) with underfloor equipment]
――Originally, it was a 17m class vehicle manufactured by Nissha as the Moha 100 type in 1927, and it was a car body featuring rivets on both cabs.
――The prototype is the figure after the renewal and repair that was carried out from 1951.
――The rear cab was removed, a gangway door and a gangway hood were newly installed, and a crew door was newly installed on the side of the cab, and the pantograph was replaced with PS13 etc.
--The dolly has been replaced with TR14 (DT10).
--It can also be manufactured as Takamatsu Kotohira Electric Railway 1201. Old Moha 1202
――The two cars, the control electric car (Mc) 1201 and the control car (Tc) 1202, formed a fixed train and were used as an express train [Ritsurin-go] on the Kotohira Line.
[Konan Railway Moha 2250 type (1961 with 3 doors) with underfloor equipment]
――After the transfer to Konan, the prototype is the Moha 2251, 2252, and 2253, which are three-door vehicles and have roots in Nissha.
[Kit overview]
――The characteristic car body is reproduced by fine etching.
――The roof plate has the Odeco part as a lost part.
--Various lost parts such as lights and jumper plugs are reproduced in detail.
--The underfloor equipment comes with compatible parts.
――The kit does not include the dolly, power related items, and couplers.
――The applicable dolly is DT10 made by Nikko.
--PS-13 is compatible with Moha's pantograph. Mounting dimensions 14 x 16 mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )