--Masterpiece 16 Series 1/80 16.5mm Gauge Metal Kit
[Tokyo Metropolitan Bureau of Transportation 10-000 type train]
――The 10-000 type is a direct train on the Keio Line, after the prototype car was manufactured in 1971, and the introduction of the primary mass-produced car was started in preparation for the opening of the Shinjuku Line in 1978.
--The expansion of the Shinjuku Line and the increase in transportation capacity continued, and by 1997, 28 8-car trains had been manufactured over the 8th stage.
――There are various variations due to minor changes each time the equipment is added, but in this project, we used the 3rd to 6th cars as prototypes, which have a one-step window on the side.
――From this formation, it will be manufactured in an 8-car formation from the time of its appearance, and will be a representative figure of the Shinjuku Line 10-000 type.
[Kit overview]
――It is a composition of the front lost and nickel silver etched body.
――The corrugated side is expressed in detail by stacking two sheets.
――The front is also the same metallic color, and it is characterized by being able to express a stainless steel body even in an unpainted state.
――Of course, you can finish it with paint.
--The rooftop ventilator, cooler and underfloor equipment are all made of white metal and are included in the kit.
--Power relations are not included in the kit.
--Other pantographs, carts, couplers, etc. are required.
――As for the dolly, Nikko KD-71 is an approximate dolly.
--The pantograph is supported by PT42. Mounting pitch 16 x 14mm
[Product lineup]
--Tokyo Metropolitan Bureau of Transportation 10-000 type basic 4 cars (TC1 + M1 + M2 + TC2)
--Tokyo Metropolitan Bureau of Transportation 10-000 type addition 4 cars (M1x2 + M2 + M2`)
――The image is a sample assembly photo of the leading car.
( This is a machine translation. Please allow for possible misinterpretations in the text. )