Product Description

-Convenient round bar type with the same thickness from the root to the tip!
--Material: Diamond grain bond by nickel electrodeposition to carbon tool steel.

――What is a diamond file? ::
-A file in which artificial diamond grains are bonded to the surface of the file by a plating method (nickel electrodeposition method) using a special metal such as nickel.
-Since the bonding force is very strong, the amount of protrusion of the diamond grains bonded to the file surface can be increased, and the high concentration density of the diamond grains on the surface demonstrates good cutting force.

――Since the concentration density of the surface is high, it demonstrates good machinability for deburring finish cutting, correction, grinding, and multiple cutting of the same size.
--Can be used for cutting materials such as fat, carbon resin, cemented carbide, hardened steel, ceramics, glass, tile, reinforced plastic steel, and stainless steel.
* It is not suitable for cutting wood because it will clog immediately.
--Since the diamond abrasive grains are firmly held by the file base, the initial sharpness is maintained until the end.
――If you get clogged, use a toothbrush to remove the sharpening powder, and the cut will be restored.

--Usage: Plastic model, model railroad, RC, figure, dollhouse



Item Size/Weight : 23.7 x 5.2 x 1.5 cm / 14g

Product Specifications

Item series

Shokunin Katagi , File

Item code

AL-K209

JAN code

4562256113256

Purchase Information