This item is limited to 12 per household.
- We will release 2 types of paper kits of [Office] for 1/80 No. 16.
- This kit requires painting.
- This is an all-paper kit that laser-engraves the outer wall clapboard.
- The roof can be removed after assembly. Additional processing is easy.
-Reproduce the clapboard on the outer wall with laser engraving.
- Easy kit for easy assembly.
- After assembly, the roof can be removed and additional processing is possible.
[feature]
- Jigs are included for parts that tend to slip when gluing, such as window frames. It can be glued accurately.
- Engraved exterior walls. Reduce the number of parts and reproduce the fine appearance.
- Aiming for an [easy kit] that is easy to assemble despite its delicate appearance.
[Items required for assembly]
- In addition to the items necessary for general paper kit assembly, it is useful to have the following items.
・Oil-based, quick-drying ・Acrylic lacquer spray: For filling carved outer walls (high water absorption and low strength)
・Spray glue: This makes it easier to bond the window frame (door frame) and the roof tile.
・Plastic van for glass expression
・Painting supplies
- Completion dimensions: about 129 x 83 x 99mm height
*The difference between A and B is the design of the window and door.
- The kit is unpainted.
Engraved exterior walls are particularly susceptible to paint penetration, so please prepare a base before painting.
There are many ways to do this, but the easiest way is to spray gray [oil-based, quick-drying, acrylic lacquer spray] over the entire sheet before assembly.
- Please prepare a separate transparent plastic bag etc. to express the glass.
- There is also a version [Office B] with aluminum sash windows and doors (Part No. 2029).
( This is a machine translation. Please allow for possible misinterpretations in the text. )