Product Description
- 1/80 16.5mm paper kit
-The model AG is a 3rd class combined passenger car manufactured in 1899 to coincide with the opening of the Tokaido Line between Shimbashi and Kobe.
- It seems that the period of being a combined car was short, and in the 1900s, the 3rd class room was remodeled into a luggage room, and it seems that it became a luggage car Bubo 13.
- Formed a group called [Meiji 22 type passenger car] with 1st, 2nd class and 3rd class cars manufactured at the same time, mainly active on main trunk lines until the end of the Meiji era, and became the basis of early bogie passenger cars rice field.
[About the model]
- An unpainted kit that uses 3D printing for detail parts, mainly laser-cut paper parts.
-The basic configuration of the car body is based on the already released 2-axle classic passenger car and the basic passenger car of the Railway Institute.
- Since there is no commercially available dolly, a new one is included for this purpose.
- About the dolly
-In 1889, the British-style bogie passenger car that the Railway Bureau facilitated in line with the opening of the entire Tokaido line, the so-called [Meiji 22 type passenger car], modeled the bogie that was worn by some luggage cars. It is characterized by reinforcement around the axle box.
-A trolley side frame (made of acrylic 3D printing) fitted with bearings made of turned brass is glued to a frame made of two layers of t0.3mm phosphor bronze and assembled.
[Contents]
- assembly instructions
- acrylic parts
- Brass bearing
- parts sheet
- Decal sheet
- screws, nuts
- masking sheet
- Etching parts
[Products required in addition to this kit]
- φ0.3, φ0.5 brass wire
- Pea φ10.5 pivot wheel
- Nikko model center pin for wooden floorboards
- PVC board for window glass
- Coupler (IMON coupler No209 or HO gauge [Screw coupler] long type for bogie car)
- Paint (grey, grape color 1, black)
*Some parts, wheels and couplers are sold separately, please purchase separately.
*Although we take great care in manufacturing, there may be some parts that cannot be laser cut. In that case, make a cut with a cutter knife or the like to deal with it.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 24.1 x 14.5 x 2.7 cm / 142g
Product Specifications
- Item code
- 332
- JAN code
- 4580594093320
Purchase Information
This item is limited to 20 per household.