- It is a general-purpose additional circuit part that makes it possible to turn on lights while stopping.
- 1/80/N gauge common product.
- ISV is an abbreviation for Increase Starting Voltage.
-By inserting it in the middle of the motor circuit of the locomotive, it has the effect of lowering the input voltage to the motor, which makes it possible to turn on the interior lights etc. first.
- Board size: 18.5mm x 10.5mm
[Basic wiring method]
- Insert and connect the ISV board between the wiring from the rail and the wiring to the motor.
- This circuit makes the starting voltage to the motor slower than room lights etc.
- When assembled and the power pack throttle is raised, [the interior lights, etc. will turn on at first] → [the motor will start turning when the throttle is further raised].
*In the case of a coreless motor and a pulse control power pack, the effect may be weak.
* In the case of the old vertical motor, the power consumption is large and there is a risk of damage.
* In the case of the old bar type motor, power consumption is large and there is a risk of damage.
*Regardless of the above, please do not use for motors with power consumption exceeding 400mA.
* Please use under the responsibility of each user.
( This is a machine translation. Please allow for possible misinterpretations in the text. )