Product Description

- Balancer Gray is a special abrasive made by sandwiching both sides of a hard sponge material that is slightly thicker than the company's Balancer White with 2000 high-count abrasives.

-By using it after polishing with the separately sold Sandloop Flat No. 600, the polishing effect of No. 2000 will be demonstrated at once.

- When painting as it is without applying a surfacer, it is possible to perform final surface preparation only with Balancer Gray without using many files with different grit numbers, greatly reducing the time and effort required for surface treatment work. can be done.
- It is also very convenient to treat the paint substrate in a short time.

- By polishing both sides with Balancer White after polishing with Balancer Gray, it is possible to polish to a glossy gloss state.

- If you cut it and use it, it will improve the workability when polishing details and the durability of the polishing agent.
- Water sandable.

[Precautions for use]
*Can be washed with water. If it gets dirty, it can be washed with water, dried and reused.
*If you use it directly on a rough surface, the polishing part will wear out quickly, so be sure to use it after polishing the surface with No. 600 or later.
*It is recommended to cut into 1cm units before use, as it may be consumed rapidly depending on the usage.
*In the case of surface treatment including seam treatment, please use it after preparing the surface with a sand loop in advance.


Item Size/Weight : 10.5 x 7 x 2 cm / 16g

Product Specifications

Item code

R-B-G1

JAN code

4580610590284

Purchase Information