- Product description The camera mounting part at the tip can be rotated to face the target.
- Even the kit can be assembled as separate parts at any angle.
- The camera lens and glass surface are separate parts made of transparent resin.
*Since it is 3D printed using transparent resin, it is not completely transparent in the kit state.
*A pattern is included so that the three glass surfaces can be replaced with 0.3mm thick transparent plastic plates.
- AN/AAQ-33 is modeled down to every detail using 3D modeling and 3D printing.
- The shape of the F-2 exclusive pylon is also accurately reproduced.
*The pylon has a shape compatible with #RafAvi's F-2A intake (4827, 4828).
*A hole positioning pattern for drilling dowel holes for installation is included.
*Some adjustments are required when incorporating into Hasegawa 1/48F-2.
- AN/AAQ-33 is an American-made targeting pod that can be used for navigation support and target detection in bad weather and at night using optical sensors, and can also emit a laser to guide laser-guided bombs. can.
- The Air Self-Defense Force has adopted it for the F-2, and it is mounted on the right side of the intake via a special pylon that is different from the F-16.
-Currently, it appears to be installed on Unit 540 and operational tests are underway.
- Material: Light curing resin
*Please be careful not to pour too much adhesive as it may stick.
( This is a machine translation. Please allow for possible misinterpretations in the text. )