Product Description

- If you were to build a modern aircraft carrier with a vast flight deck, you would want to load it with planes, but there are few kits of parked planes, and building a large number of planes is a lot of work.
- In response to such demand, we have produced a parked F/A-18E using 3D printed parts and etchings.
- The fuselage is integrated from the vertical and horizontal stabilizers to the folded main wings, nose landing gear and main landing gear, so almost no assembly is required. The flaps that lower when the aircraft is parked are made of etched parts, giving the aircraft a sharp look and making it easy to assemble.
- Each set contains four aircraft, three different configurations: one without drop tanks, two with center tanks, and one tank under each wing.
- Just make it and place it on top to create a natural look.
- Eight drop tanks are included as bonus parts. They can also be used as small items on the deck. The 3D printed parts are made of high-toughness resin and can be separated, which greatly improves the risk of breakage during assembly.

- The included etching parts include the flap and the leg compartment cover.
- Simply paint each part separately to complete the finish.
- Use instant adhesive to assemble the etching parts.

[specification]
- 3D printed parts (12 pieces), etching parts (1 piece)
- Each box contains parts for 4 aircraft.



Item Size/Weight : 11.3 x 5.7 x 2.4 cm / 16g

Product Specifications

Country

USA

Item code

020632

JAN code

4573259020632

Purchase Information