Product Description
- The 813 series is a commuter train that JR Kyushu began manufacturing in 1994, and was manufactured to replace the JNR commuter trains.
- Among these, we will be commercializing the 100 series, which features beads in the door pocket area, and the 200 series, which is the largest group in this format.
- The real train is operated in conjunction with the 811 series, 817 series, and 821 series, so you can enjoy coupling it with our 811 series product.
- In addition, the 200 series has been renumbered in recent years to the 2200 and 3400 series.
- The main parts of the kit are made of paper, the front parts and roof-mounted equipment are 3D printed parts, and the glass and floor panels are made of acrylic.
- Decals are included for vehicle numbers and markings.
*This kit is an unpainted material kit. Painting is required after assembly.
*To complete the model, separate bogies, motors, pantographs, couplers, etc. are required.
[Product Summary]
- This is a laser cut paper body kit. It is an easy to use kit, but it has been recreated with the utmost detail.
[Kit Contents]
- Paper parts for body and underfloor equipment
- Acrylic parts such as lights, window glass, floorboards, etc.
- Front 3D printed parts etc.
*This kit is unpainted. Painting is required after assembly.
[Features]
(1) Although it is made of paper, it expresses the unevenness of beads and other features.
(2) In addition to the front section, roof-mounted equipment, electrical couplers, and yaw dampers are included as 3D printed parts.
(3) A specially designed floor plate is included. If you use the recommended truck and power source, you can make it run without any complicated modifications. (Two coreless power trucks are used for power source.)
(4) Decals are included for logos and markings.
[Items to be prepared separately]
- Power source: Tenshodo coreless power truck 26P φ10.5 plate wheels.
- Cart: Nikko Model Cart DT50, Nikko Model center pin for wooden floor boards.
- Coupler: Endo coupler or Endo drawbar, Endo coupler mounting base, or IMON coupler (only IMONO coupler at the front).
- Pantograph: Substituted with PS22N or similar from various companies.
*The floor board is designed with the above trolleys and couplers. If you wish to use other trolleys or couplers, please make your own arrangements.
- Manufactured and sold by: M's Craft Co., Ltd.
- Approved by JR Kyushu
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 30.6 x 22.9 x 5.4 cm / 474g
Product Specifications
- Item code
- Hs077
- JAN code
- 4582485421786
Purchase Information
This item is limited to 20 per household.