Product Description
[About the actual car]
This vehicle is a 35-ton mobile machine manufactured by Hitachi in 1970 for use in shunting operations at a chemical plant adjacent to Nihongi Station in Niigata Prefecture.
It was in service until March 2007, when freight handling at Nihongi Station was discontinued.
It is fitted with a bogie frame similar to the TR41C type bogie used on freight cars.
[About the model]
This is a paper kit made up mainly of laser-cut hard paper parts.
It expresses the angular roof and long deck edge of the later Hitachi 35t locomotive.
The delicate handrails and release levers, radiator grille and side window frames are etched.
Includes 3D printed brake cylinder, chimney, and bogie frame springs.
A masking sheet is included for painting the window rubber on the side of the driver's cab.
[Contents]
Assembly Instructions
Parts Sheet
decal sheet
masking sheet
Screws and nuts
Etching parts
3D printed parts
[Products required in addition to this kit]
Tenshodo Coreless Power Transformer 24.5P (2 pieces)
IMON HO301 coupler (2 pieces)
Echo Model Right-Facing Air Hose (3603)
Echo Model Typhon (751)
WAVE H Eyes 1 Mini Clear (OP-251)
Brass wire 0.4mm
PVC board for window cells
Surfacers and paints
*We take great care in our manufacturing, but there may be areas where the laser cutting is not done properly. In such cases, please make a cut with a utility knife or similar tool.
*Clean resin parts thoroughly and fill in any rough surfaces with surfacer or putty.
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 24.3 x 14.6 x 2.9 cm / 112g
Product Specifications
- Item code
- 538
- JAN code
- 4580594095386
Purchase Information
* Hurry! This item is almost sold out!
This item is limited to 1 per household.