Product Description
This 1/18 scale resin model recreates the RX-7 Mazda Speed A-spec (FD3S) that first appeared in volume 17 of the comics version of Initial D, in which Takahashi Keisuke, active as part of Project D, battled the ER34 in his first race.
New features this time include the ability to open and close retractable headlights, as well as engine start-up sounds and engine sounds when idling.
The fuel filler cap cover serves as the power switch, and pressing the switch turns the power on.
Slide the magnetic stick included with the product near the tip of the hood to open the light cover.
Touching the area around the washer nozzle on the hood will activate engine and idling sounds.
*The light cover can be opened and closed by simply sliding the magnetic stick, even when the power is off.
The LED lights work the same as before, but with increased brightness. Touching the tip of the hood with the magnetic stick will turn on the headlights, taillights, backlights and meter panel. Bringing the stick close again will make the hazard lights flash, and bringing the stick close again will turn off all the lights.
To charge the battery, remove the rear license plate, which is attached with a magnet, and insert the cable into the USB jack (Type C) that appears.
Charge for about 15 minutes.
The vehicle is fitted with Mazdaspeed MS 02 type 17-inch wheels (polished and black) and is lowered.
Equipped with Mazdaspeed exclusive front bumper, rear spoiler, brake calipers (red), large diameter muffler, Recaro bucket seats, 4-point seat belts, and MOMO type steering wheel.
The license plate will be white, in line with the comic version.
Based on 3D scanning data of the actual car, the detailed specifications of the comic version [RX-7 Mazda Speed A-spec (FD3S)] have been thoroughly verified.
Under the supervision of the copyright holder, the exterior and interior have been reproduced in detail.
This is a limited edition Initial D 30th anniversary version, with a scene from the comic printed on the background paper of the package.
*Please note: Please purchase a USB cable (Type C) separately to charge the LED light.
*WEB-exclusive model
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 33.9 x 17.8 x 13.7 cm / 1204g
- *[ Regarding the product image ] The image may differ to the actual product.
Product Specifications
- Item code
- IG3940
- JAN code
- 4573448909403
Purchase Information
This item is limited to 3 per household.