Product Description

- This is a convenient guide tape for scribing lines, with 5mm wide markings on the left half of the horizontal line and 1mm wide markings on the right half.
- The strong adhesive type ensures a secure fit to the parts.
The tape conforms firmly to the parts even when bent.
- Cut vertically in 5mm widths.
*Due to the manufacturing process, the bottom edge will be 3mm wide.
Two sheets included.

- This is a thick tape used as a guide when scribing lines.
Before use, remove any oil, dirt, or debris from the surface where the parts will be attached.
- This is a guide tape for scribing lines, with markings of 5mm and 1mm.
Because it's a strong adhesive, sheet-type tape, it adheres firmly to parts without curling up.
When the tape is bent during use, it conforms firmly to the shape of the part and adheres tightly.
- The included markings allow you to accurately determine the size, which is convenient when engraving symmetrical lines on both sides.
- Since it's a 5mm wide tape, you can accurately determine a 45-degree angle by cutting it diagonally when using a 5mm scale.
- Because a strong adhesive is used, if the tape is left on the parts for a long time, adhesive residue may remain.
In that case, wash the parts with a mild detergent to remove the adhesive before painting.

*Regarding lifting of the appearance: Due to the pressure during the press processing (die-cutting) process, some tape material may have slight lifting or unevenness from the backing paper.
These are unavoidable phenomena during product manufacturing, and we ship the products only after confirming that there are no quality issues.
There are no issues with performance or usability.


Item Size/Weight : 16.4 x 12 x 0.8 cm / 18g

Product Specifications

Item code

80057

JAN code

4571180800576

Purchase Information