PVC FigureList of Customer's postings

passerby

Pop Up Parade Hatsune Miku (PVC Figure)

@fyi:
They already have the FigFix series thats figma quality around 4000~5000yen, what makes you think GSC would make higher quality things at much lower price?

2019/02/20 9:25:55

passerby

Plamax MF-32: Minimum Factory Kasumi C2 Black Ver. (Plastic model)

@No Name:
err... dude, its an assembling kit. they usually cost around that much. If the series isn't selling, they wouldn't be able to release new ones.

2019/02/20 9:15:09

jamie

No Game No Life: Zero Petitcolle! Acrylic Key Ring Schwi (Anime Toy)

its really good but on the big side compared to my other one. 9/10 good but big

2019/02/18 14:01:12

Mr. BigBud

1/12 Little Armory (LA054) Water Gun C2 (Plastic model)

Glad that they finally released MAC-11. And i didn't expect them to release the obscure IDW, but at least this IDW doesn't squeak like crazy.

2019/02/16 20:23:10

Mr. BigBud

1/12 Little Armory (LA047) PS90 Type (Plastic model)

Change the PS90 long barrel with the short/suppressed one in the original LA P90, and voila! You have a black P90 TR.

2019/02/16 20:19:47

Epwilcox15

Kurosaki Mea Max Factory Ver. (PVC Figure)

When will this Amazing Figure be back in stock?

2019/02/15 22:11:06

JCole

HMS Ark Royal (1939) (Plastic model)

Over the years I have built many models by Academy,Revell and Tamiya,and I had doubts about Merit (They make toys dont they?) My doubts were without foundation,the qualityand fit are up there with the best.

2019/02/14 2:28:25

nadenade

Asuna Ver. Glint (PVC Figure)

pointy nips... its orca toys afterall... *sigh*

2019/02/13 9:03:58

No Name

Pop Team Epic Anti Sticker Set Anti Popuko Set (Anime Toy)

very bad. i am going to buy all of them and burn them.

2019/02/11 9:44:01

anon

Gigantic Arms 04 Armed Breaker (Plastic model)

kit is of excellent quality and has easy to follow instructions, the only issue I personally had was the fact that you have to build multiples of the same part (wheels, connectors, etc.) which can be annoyingly tedious but other than that I haven't had any issues with the kit at all.

2019/02/09 3:18:04

Doffazuki

Overlord II Especially Illustrated Dakimakura Cover (Albedo) 2 Way Tricot (Anime Toy)

Yes, Albedo, Love Her so much on this beautiful dakimakura cover, the 2way is so much greater than the others, I love the feels like human skin. very great, just like, she is next to you :-)

2019/02/08 9:14:28

Anon

DC Comics VARIANT Play Arts Kai Batman Rogues Gallery Two-Face (Completed)

This is a true collector's item for the Batman series. Great collaboration, design, paint job, detail, quality, value, and idea. One of the first daring attempt for a Batman/Two Face figure! 2 for 1!!!

2019/02/07 21:00:40

passerby

Nekotama (Set of 9) (PVC Figure)

@nadenade:
seems each one is around the size of your fist, so each of them would be fairly large.
if you divide it, its1667 JPY each so i guess you would wanna buy it with a friend or something.

2019/02/06 18:57:21

nadenade

Nekotama (Set of 9) (PVC Figure)

why so expensive tho?

2019/02/06 14:17:06

passerby

Atago: Midsummer March Ver. (PVC Figure)

@Moy:
Its Alter, they usually only do 1/7 or 1/8... and its Alter, you can expect quality but the price is always steep.

2019/02/06 9:31:44

Moy

Atago: Midsummer March Ver. (PVC Figure)

This should be a 1/6 figure at that price.

2019/02/06 4:17:00

No Name

Nier: Automata 2B (YoRHa No.2 Type B) [DX Edition] (PVC Figure)

This looks like a glorified prize figure. On the flip side, if people keep donating to SE, we can hope for a Nier automata 2.

2019/02/05 6:15:29

Mantis

DC Artist Alley Batgirl by Sho Murase (Completed)

7310yen for a 17cm figure? Forget it.

2019/02/03 5:41:59

omega59

Nendoroid Catwoman: Ninja Edition (Completed)

She is fantastic esp. next to Harley. Great detail and awesome paint job. ! Now we need Batman Ninja Nendo PLS!!!

2019/02/01 22:57:31

Cee

Gundam Gunpla Package Art Collection Chocolate Wafer (Set of 20) (Shokugan)

I really hope these come back in stock.

2019/02/01 21:01:40

passerby

Vanilla: Swimsuit Ver. (PVC Figure)

@ProRocker:
cos its figma size and can't change pose?
so ppl just get it for the body n shove other figma heads onto it?

2019/02/01 9:36:42

ProRocker

Vanilla: Swimsuit Ver. (PVC Figure)

why is it so cheap?

2019/02/01 1:26:22

No Name

SSSS.Gridman [Rikka Takarada] (PVC Figure)

Pretty nice from my point of view, why rated so low?
All becoz of the price? Sour grapes again?

2019/01/31 22:42:37

Cee

Bullet Knights Lancer (Plastic model)

I'm loving the pallet swap from the other blonde, one red eyed, black and gold version.
This pink hair, green eyed Tsundre style looks great as well.
If she comes with the knife and fork, I'll buy it.

2019/01/29 22:54:14

JkC

Atago: Midsummer March Ver. (PVC Figure)

Best waifu, but god she is expensive. o_o

2019/01/28 16:57:49

passerby

Shojo Kageki Revue Starlight Karen Aijo (PVC Figure)

@No Name:
3 is average, so its very slightly below average.

Pros: good pose very active looking, nice facial expression
Cons: paint work for hair and costume lacks depth, eye print looks flat and lacks gloss.

Conclusion: If you are a fan, it is definately worth getting. if not, the price may be a little high for its quality.

2019/01/28 13:37:44

No Name

Shojo Kageki Revue Starlight Karen Aijo (PVC Figure)

2.6 stars.... What's wrong with it? Boobs not big enough for you?

2019/01/27 14:07:30

nadenade

Racing Miku 2014 ver. (PVC Figure)

I hope they re-release this one in the future. of course after a bit maintenance of the turbine that way too easily broken...

please release this again. my only year 2014 regret on the list!

2019/01/22 11:17:34

nadenade

Racing Miku 2018 Ver. (PVC Figure)

i prefer this one & 2014 one... 2014 especially the best one so far.

2019/01/22 9:41:04

nadenade

Hatsune Miku: 10th Anniversary Ver. Memorial Box (PVC Figure)

amazing indeed, but with that price... should at least give us a 1/8 with LED version instead... that would truly commemorate 10th anniversary!

2019/01/22 9:40:11

nadenade

Hatsune Miku: Vintage Dress Ver. (PVC Figure)

that high price... that meager quality... details... that 1/7 size...

not my cup of tea...

2019/01/22 9:36:44

Nitramy

Frame Arms Girl & Weapon Set (Jinrai Ver.) (Plastic model)

Would be nice if we had a deluxe version in black with some blue trimmings. Because RULES OF NATURE!!!

2019/01/21 20:27:26

Cee

GGG Mobile Suit Gundam: The 08th MS Team Aina Saharin (PVC Figure)

Now if we could get a Marida Cruz figure next, I can die happy.

2019/01/21 9:38:41

Ded_Troy

Gram Lights 57 Extreme 18 Inch (Accessory)

Tire width 10 mm
Disc width 11.5 mm

2019/01/19 17:48:26

ray

Hataraku Onna no Ureta Ase Otome Kurosawa (PVC Figure)

Excuse me,this toys have any goods?

2019/01/19 16:05:13

Mcnosurge

Furaijin Ikazuchi (PVC Figure)

Guess I'll preorder and save up for this. Keiko's Beauty Line collection is something to behold. Been waiting to see if the next one would be in a pose to my liking. This is definitely not what I had in mind, but looks great too.

2019/01/19 15:22:10

Turbojett

1966 American Coupe TypeI w/Blond Girls Figure` (Model Car)

That's a 1965 Impala, not a 1966.

2019/01/18 22:50:26

nadenade

Artfx J Kino (w/Initial Release Bonus Item) (PVC Figure)

please one more re-release pleazeee.
*sob sob*

2019/01/17 16:08:59

nadenade

Saber/Altria Pendragon [Lily] (PVC Figure)

this one totally capture the essence of lily indeed. I mean, look at that lilly. lol

2019/01/17 16:07:32

nadenade

Kurumi Tokisaki (PVC Figure)

this figure was sold for 40.000yen in auction a year ago. other web sell it for 35 - 38K...
dudes must be crying blood right now lmao.

as for me, i don't follow the series but this is indeed good character nonetheless.

2019/01/17 15:35:39

Cee

Frame Arms Girl Laetitia (Plastic model)

That fang is worth the purchase alone.
Don't @ me

2019/01/17 8:21:30

PanzerV

Panther Ausf.G Early/Late w/Full Interior (Sd.kfz.171) Clear Turret & Upper Hull Parts Limited Edition (Plastic model)

It’s a nicely detailed kit with little to no issues when building, the included workable tracks and clear parts add nice touches to the kit

2019/01/17 2:48:31

Nic

Saber/Altria Pendragon [Lily] (PVC Figure)

The colour of her eyes look like Nero Saber rather than Arturia Saber

2019/01/16 15:42:30

PanchiraSama

Girls` Frontline Suomi KP-31 (PVC Figure)

Why the double eyebrows? Buttons look out of place on her nipples. And why is her gun flowing in mid air?? Shame, such a kawaii piece otherwise...

2019/01/16 2:17:36

Omega59

Nendoroid Black Panther: Infinity Edition (Completed)

Sorry guys, I did not like this Nendo design. Firstly his head peg design terrible! My peg broke and it's extremely hard to put it back. I don't understand the double head joint.. just why??? Haha. Should be cheaper price imo.

2019/01/15 7:49:43

Omega59

Nendoroid Harley Quinn: Sengoku Edition (Completed)

Really pleased with this Nendo. Lot of detail was put into her design and she's great next to all the other super hero figures.

2019/01/15 7:45:38

Cee

Frame Arms Girl Zelfikar (Plastic model)

Baselard 2.0. Finally are girl levelled up.

2019/01/10 17:55:59

Cee

Chaos & Pretty Magical Girl (Plastic model)

This kit is a great insight into the improvements the megami device line made over the F.A.G kits.
While I understand the Magical girl isn't everyone's thing, I actually really enjoyed building the kit.
The joints are tight/solid and the body doesn't fall apart just looking at it like most F.A.G kits. She comes with parts for a normal girl and the MG transformation with a ton of accessories and effect parts. There's even a basic stand included which is nice.

2019/01/10 10:39:10

random

Nendoroid Shintaro Midorima (PVC Figure)

@SO:
...i dun c the problem... mind clarifying?

2019/01/09 13:33:32

SO

Nendoroid Shintaro Midorima (PVC Figure)

https://www.1999.co.jp/itbig58/10582337a6.jpg

COLOR DIFFERENT PROBLEM

2019/01/08 21:46:46

White Catears Lover

Super Sonico White Cat Ver. (PVC Figure)

Oh god, my weakness exploited!! I LOVE white cat ears (and tails) the most!! But... my wallet..

2019/01/06 8:19:01

passerby

850 Saloon 1995 Decal Set (Decal)

@Ronny:
if it was close to the original decals, Shunko Models would be sued by Tamiya...
you should have checked the product photo on the product page before purchasing...

2019/01/05 10:00:28

Ronny

850 Saloon 1995 Decal Set (Decal)

Just have to say this is not close by be the original decals that is on the right at the picture.
I bought this decals because the original ones is aging but the new ones dose no benefit.

2019/01/04 20:55:43

Plair

Riobot Shin Getter-1 (Getter Robo Armageddon) (Completed)

Wings come with scratched. The base with scratches and lose waste. Want to return back the item but shipping is too expensive.

2019/01/03 4:58:52

Cee

Softback Sanding Sponge Stick Full Set (220-4000, 8 Sticks in 1 Pack) (Hobby Tool)

This set is very good, they can be used wet and dry depending on your needs and facilities.
The sponges are quite thick and a decent length 15-20cm in length. This allows for long single sanding strokes and work very well for curved surfaces.
The sticks have a hard Center with sponge a firm sponge material, coated in an electrostatic applied sand grain.
Since the set is 220-4000 grit it covers all bases, but imo you only need 400-1000 + 1500-4000.

2018/12/30 7:01:04

llaannccee

MB-20 Nemesis Prime (Completed)

How come nemesis prime looks more menacing here than the last knight?

2018/12/28 20:22:28

J Loewen

High School DxD Hero B2 Tapestry B [Rias & Akeno] (Anime Toy)

Very nice :)
The best one.

2018/12/28 16:17:45

AnotherByte

Bloodsucker [PS Version] (w/Initial Release Bonus Item) (Plastic model)

Can anybody tell me about the ‘initial release bonus item?’

2018/12/28 2:49:43

llaannccee

[Ane Naru Mono] Chiyo: The Sister of the Woods with a Thousand Young Ver. (PVC Figure)

can't believe that this could be made :o

2018/12/27 22:17:22

Mario

Kiznaiver Rubber Strap Collection Buralink (Set of 8) (Anime Toy)

I really hope these charms get re-stocked soon

2018/12/27 6:11:08

Someone

Polynian Dreamy (Completed)

Sweet!!

2018/12/26 21:57:35

nadenade

Plachta (PVC Figure)

damn dat price. damn dat lewd pose.
wanna buy but dat damn lewd pose. her outfit is too revealing ><

2018/12/26 11:10:27

nadenade

Chi (PVC Figure)

preorder this asap. gonna go up in value IMO.

2018/12/26 10:07:17

catouttabag

Chi (PVC Figure)

@wowed - The dress is from the cover of the Chobits manga volume 3.

2018/12/26 2:26:25

Mike

[Sword Art Online] Yuki Asuna (Fashion Doll)

To bad most of the stuff is not longer available. Because sold out.
All of them should be still available for persons outside Japan.
It is just bad when you see the Orignal Price and then the Moon prices from some which it seems got a bunch of them and sell them with prices over 1000 US$.

This sucks for new buyers.

regards

2018/12/25 22:33:17

Homalucky

Houtengeki [Anubis: Water Bath] (PVC Figure)

@Archer King
...On youtube there is an unboxing of this figure and the guy touched the bad luck that the figure came with the broken left hand.
I'm surprised the way it comes in the box, I expected a blister and better presentations

2018/12/25 15:54:24

Homalucky

Houtengeki [Anubis: Water Bath] (PVC Figure)

@Archer King
Now I understand, I did not know about those data that you comment, if it had been I would have thought twice about buying it, It looks very good on the shelf, but I bought figures even with a lower cost and with better quality, more great too
Now that says that if it can come broken, in my case, in the hair of the figure in the last strands broke the tip of two very small strands that would affect me more in returning it, so I better keep it ...

2018/12/25 15:53:13

Someone

Tekken Bishoujo Jun Kazama Renewal Package Ver. (PVC Figure)

Noooo, same as the old version, i hoped they put some bonus like extra parts... changing the package alone is dull. -_-

2018/12/25 15:09:52

Archer King

Houtengeki [Anubis: Water Bath] (PVC Figure)

@Homalucky:
the product image is just CG, and if Im not mistaken, they are made by 3D printers.
so quality might not be top class, but for its price and size, this is still great in my opinion... that is, as long as you don't receive it shattered in pieces...

2018/12/25 13:50:30

школьник-кун

Kurumi Tokisaki (Figure)

Tnx Koto for re-release. Kurumi have kinda wrong appearance considering her actual character (too much smiley-happy-cutie) but still figure is very nice. Definitely this is worth addition to collection.

2018/12/25 12:07:07

Homalucky

Houtengeki [Anubis: Water Bath] (PVC Figure)

Part 1
I just received this figure, the first impression is a bit bad. Leaving aside that they come recharged in a puliuretano covered with a black fabric.
To the touch of the figure is something different (a bit scratchy) to the other pvc figures that I have, it does not have that brightness that is seen in the photos (it's like a matte color)
It is very light because it is hollow inside the torso and makes any movement fall.

2018/12/25 9:42:42

Homalucky

Houtengeki [Anubis: Water Bath] (PVC Figure)

Part 2
One of the ears did not fit in the groove of the head and I had to lower the lace a bit with a razor.

It measures a little less, about 25.5 cm and the details vary a lot in relation to the photos.
If you are thinking about buying it, take into account that it is not a high quality figure, I recommend that you buy it with a discount.

2018/12/25 9:38:25

No Name

Artfx J Haruka with Mudkip (PVC Figure)

HA!
Take that Scalpers!

2018/12/23 1:07:55

fyi

Chi (PVC Figure)

Nice base. Makes it different from the other figures. Good size and a reasonable price. What is the size of the figure without the base? Don't want to buy something too small.

2018/12/22 15:22:48

intrepid eye

Mikoto Misaka (PVC Figure)

this looks better than previous Misaka figures released

2018/12/21 23:15:49

No Name

Mikoto Misaka (PVC Figure)

Greatest anime character bar none

2018/12/21 22:22:17

No Name

Chi (PVC Figure)

At last, we meet again.

2018/12/21 16:38:01

wowed

Chi (PVC Figure)

I don't remember that dress. But looks dope! Cool base, recognizable Chi. At least for first look.

2018/12/21 15:24:29

No Name

Mikoto Misaka (PVC Figure)

Why take you so long?.....bilibili chan

2018/12/21 11:52:22

No Name

[Ane Naru Mono] Chiyo: The Sister of the Woods with a Thousand Young Ver. (PVC Figure)

I love her thickness...but her colors could use some work.

2018/12/20 23:41:36

No Name

figma Goblin Slayer (PVC Figure)

NICE!! Was hoping to see him in Figma form!!

2018/12/20 23:39:00

Discoceris

Kirie Kagarino Illustration by Jin Happobi (PVC Figure)

It's been reduced by 3K, so I'm sure you'll be buying it, right?

2018/12/19 15:07:45

Discoceris

Honkai Impact 3rd Shinen Sakimitama/Sakura Yae w/Bonus Item (PVC Figure)

Because it's not manufactured by well known company, with a wealth
of experience regarding the overall design, manufacturing and handling.
Due to this, for a new startup operation, they will need to recoup the cost
or at least not lose too much money.

2018/12/19 14:58:36

Alaris

Final Fantasy XIV Bring Arts Estinien (Completed)

Great figure overall, but be super careful with moving the arm/s as they are too fragile for movement, making it too risky to figure out if the one you have is a dud. the only issue on mines is the pivot joint on left arm, which broke instantly when moving 20 degrees forward.

Another person who bought two had the same issue with one and the other had it on its right arm.

Wrapped wire just to keep it under the arm under the pauldron.

2018/12/19 14:38:33

Wolverine

Appmon Chip Ver.6.0 Advent ! God Appmon (Set of 12) (Character Toy)

I would love to have this item appmon chips

2018/12/19 13:37:04

Cee

Bullet Knights Launcher (Plastic model)

Finally, a one eyed mecha girl with a HUGE weapon that needs a stand to hold it.
Dreams do come true!

2018/12/19 4:15:12

dename

Bullet Knights Launcher (Plastic model)

1-eye-robotgirl who cannot hold 1 big gun without 2 stands. I will call her Model 112. I really (!) hope there will be option for smaller gun and smaller shield for better play- and pose-ability.

2018/12/18 19:23:33

No color guide

TBM-3 Avenger (Plastic model)

This is a nice looking model but I am unable to assemble it because Trumpeter left out a list of colors required. I If it's possible for you to send me something with a list of Tamiya paints that I could order from you, please do. Thanks.

2018/12/18 15:15:53

Laquita

Kasumi: C2 Ver. Refined Edition (PVC Figure)

Kasumi 😍❤

2018/12/18 1:58:54

Fox

Kiss-Shot Acerola-Orion Heart-Under-Blade: 12 Years Old Ver. (PVC Figure)

When will she ship

2018/12/15 21:37:37

Miraieyes

Zero Two (PVC Figure)

Great figure, Nice details must buy if you like zero two

2018/12/14 7:55:44

Someone

figma Pharah (PVC Figure)

At last, Pharah!!

2018/12/13 14:42:23

No Name

figma Pharah (PVC Figure)

Awwwwww....yeah baby!! PHINALLY PHARAH!!!

2018/12/13 9:57:56

Disappointed

Street Fighter V / Bison Battle Costume Action Figure (PVC Figure)

@Peltast:

XDDDDDDD

2018/12/12 8:26:15

Anyone

Nier: Automata 2B (YoRHa No.2 Type B) [DX Edition] (PVC Figure)

Is B2 everybody want one, don't think it matter if the finish release is different...

2018/12/12 4:06:37

nutz4PVC

Kasumi: C2 Ver. Refined Edition (PVC Figure)

1st the figma, now this, wonder why the original blue costume wasn't redone 1st

2018/12/12 0:16:30

Peltast

Street Fighter V / Bison Battle Costume Action Figure (PVC Figure)

I'd love to see clueless noobs' reactions to seeing M. Bison be called "Vega" on the photos... XD

2018/12/11 23:12:07

slayers

Kasumi: C2 Ver. Refined Edition (PVC Figure)

Jan 2020!?!?!

2018/12/11 10:16:21

It's me

Kasumi: C2 Ver. Refined Edition (PVC Figure)

Nice...😍😍😍

2018/12/11 10:02:42

Disappointed

Street Fighter V / Bison Battle Costume Action Figure (PVC Figure)

If only StormCo was more trustworthy about the release date.. bleahh.

2018/12/11 9:58:46

List of Customer's postings - Hobby Search