Product Description

[Product Guide]
- Three-light traffic light.

[Features]
- Black and white two-tone color and slim signal poles give the vehicle a realistic appearance
- Fine track specification (compatible with conventional Tomix rails)
- Improved joiner is used for the joiner
- Powered by TCS connector, lights up independently
- Lifelike lights change with the movement of the train
- The colors change in the following order: red (stop) → yellow (caution) → blue (go)
- The signal switching time is automatically adjusted to the appropriate time based on the previous lap time, allowing you to enjoy a realistic display according to the layout size.
- The direction of train movement is detected and the signal for the opposite direction is lit red.
- A mode is available where the signal turns red when it detects a loss of power to the rails.
- Touch sensor type that prevents malfunction due to external light
- You can install as many as you want wherever you want.
- Signal poles are connector-type for easy replacement
- Uses LEDs for signal lights
- Current consumption: Approx. 10mA (approx. 30mA when in mode setting)
- The coloured lights are arranged from top to bottom in the order of blue, yellow and red.

[Product Contents]
- Three-light traffic light

[Special Notes]
*Please understand how to use this product before using it.
Please note that we cannot answer questions regarding usage.

[Traffic Signal System]
- Tomix's colored traffic lights come in a variety of types, from 5-light to 2-light types.
In both cases, the color lights change according to the progress of the train, and the lights are turned in the opposite direction to the train's direction.
In this case, only the red light will be lit.
- Each traffic light operates independently, so you can install as many as you like wherever you want.
Another big attraction is that it can be attached.

[Characteristics of various traffic lights]
- When the train has passed the sensor, the color lights will change.
The lap time is counted and the switching time changes.
- If the train is traveling in the opposite direction, the light will turn red, just like in the real thing.
- By switching the mode, it is possible to display [RED] when the rail is not energized.
- You can switch to the [Slow Speed Display (※)] mode used on some trains.
(Only for 5-light traffic lights and 4-light traffic lights with deceleration indicator).
- All traffic lights operate independently, so multiple traffic lights can be added.
- Wiring is connector type, so wiring is easy.
- Because it is a touch sensor type that detects trains by touching the sensor with the metal wheels,
Can be used in dark places. (Does not detect plastic wheels.)

*Slowdown display:
A signal display used on some railways, with five or four lights.
If the speed difference between the [Progress] and [Decelerate] displays is large, the [Slow Down]
The yellow and blue lights (same color as the "Slow Down" indicator) flash one by one.
You can set it to increase the maximum speed for Progress.

[Other features]
- The length of the rail is 70mm, the same as the straight rail S70(F). The width is 37mm, with a double track spacing.
It is the perfect size to fit.
- <3064> By using the new viaduct S70-A, it can also be installed on elevated lines.

[About wiring]
- Connect the power cord of the traffic light to the TCS connector terminal of the power unit N series.
Connect:
- If you want to add more traffic lights, add them using terminal cords.
- When connecting a railroad crossing and a signal, the railroad crossing should be as close to the power unit N as possible.
Connect to:

[specification]
- Current consumption: 10mA (30mA during mode setting operation)
- Cord length: 95cm, 11cm
- Height: 4.9cm/1.8inch
- Operation of color lights on three-light traffic signals (standard mode):
Red (Stop) → Yellow (Caution) → Green (Proceed)


Item Size/Weight : 10.8 x 10.5 x 5 cm / 57g

Product Specifications

Item series

Control Systems , Track

Item code

5564

JAN code

4904810055648

Purchase Information