Product Description

--Compatible kit for early type (1927-34) and medium type (1934-35).
--The state before the 20 cm twin turret is installed immediately after completion cannot be reproduced.

--Akagi was completed in 1927 at Kure Arsenal.
--Along with Kaga, it was the first large aircraft carrier of the Japanese Navy based on the Washington Treaty, and was given a distinctive outfit.
――The flight deck is a three-stage type, which is unique to the Japanese Navy. The lower tier is the main departure deck, and the upper tier is the departure and arrival deck.
--The middle tier was not used as a flight deck due to the expansion of the bridge and the installation of two 20 cm twin turrets.
――Since a large chimney inclined downward on the starboard side and a small upright chimney were installed, the flight deck on the uppermost stage was installed with the center line shifted to the port side.
――In 1935, a major modernization renovation was started at the Sasebo Arsenal, and the entire flight deck was redesigned.

――It is a completely new mold kit that makes full use of the latest technology and design based on the latest materials.
--Before the major modernization renovation, Akagi from the three-deck era will be made into a kit.
――The structure of the underside of the deck is realistically reproduced in every detail.
--The carrier-based aircraft comes with a 9-type carrier-based fighter and a 13-type No. 2 carrier-capable attack aircraft (6 aircraft each).

--The mid-term model can be reproduced by selecting the parts.
--A small temporary bridge is installed on the starboard side of the top deck. A 12 cm starboard high-angle gun with a shield. Additional anti-aircraft machine guns.
--Overall length: Approximately 373mm
--Overall width: Approximately 59mm
--Total number of parts: 238pcs


Item Size/Weight : 39 x 13 x 7.3 cm / 475g

Product Specifications

Item series

Water Line

Country

Japan

Item code

49220

JAN code

4967834492202

Purchase Information