- New release KIHA 82-based interior parts for KATO HO! !
- Kiha 82 series that became the driving force behind the improved speed and comfort of the non-electrified section.
- Newly set the grade up parts will be new release.
- Ordinary car, seat cover for green cars, dining car tablecloth representation expressed in fabric.
- Indoor partition such as a combination of acrylic material and cutting sheet, pursued the vehicle of the atmosphere.
- Please make the means your existing grade-up of the vehicle.
- Contents:
-Seat cloth cover: normal car 2 undoubling
· Ordinary car seat rear seal: 2 undoubling
- Indoor partition plate parts: 2 bisect (total 2 undoubling)
- Note: Please be sure to clean the target part is attached to before the paste. There is a possibility to come to peel off after mounting by a release agent, and the like remain. When it is painted, there is a risk that peeling is also painted upon reattachment together.
※ We have produced a vehicle to reference, but there is a part that is different from the actual vehicle. Also, like responsibility we can not assume damage during processing. Please note.
- Materials used: acrylic, cutting sheet, cloth
※ cutting sheet, (Ltd.) is a registered trademark of Nakagawa Chemical.
[Attaching]
- [A] normal car seat back seal
It will peel off the seal that has been cut from the mount. So that it sticks to match the lower side of the back part of the seat parts. Please firmly contact is allowed Once the location is decided.
- [B] seat cloth cover
<For passenger cars>
It will peel off the cloth that has been cut from the mount. And paste the long side portion on the back of the seat parts, give it as cover, please put a protruding part of both ends to the side. Finally, please be so firmly adhesion is not so as to sandwich a pair of tweezers or the like.
- [C · D · E] interior partition plate parts (parts that dented the bottom side room door side)
D was peeled off the curing paper of acrylic parts, you stick ahead to the door parts of E in accordance with the cutting line of D. Please paste in When you are finished paste rubber-based adhesive.
Please do not use instant adhesive ※.
( This is a machine translation. Please allow for possible misinterpretations in the text. )