[Product introduction]
- We will commercialize the general-purpose `Reseau` (RESO) which can be operated on all routes from the TGV series familiar with the French high-speed railway.
- The vehicle to be commercialized this time is the organization which was changed from 2008 to the band design and the logo mark of [TGV] to be a new one that Christian Lacroix handled.
- A wedge-shaped design based on the leading locomotive straight line and a gentle curved front window with the roof will be reproduced with a new body.
- Reseau is a word that has the meaning of [network], as its name suggests, the range of operation is wide, it is a standard vehicle that is active in traveling on high-speed new lines, conventional lines and international flights.
- As with real cars, you can enjoy driving with powerful twenty-two cars with two organizations combined.
- Not only joining of Reseau's but also with TGV Duplex (new paint) is done in real cars.
- As well as N gauge, you can reproduce combined operation with different vehicles together with Duplex.
[Product Features]
- A prototype is organized corresponding to 3 power supply system and Italian entry.
- The design based on the straight line of the leading car and the gentle curved front windows integrated with the roof are accurately reproduced.
- Clearly reproduce the design of the side [TGV] logo mark and the characteristic band with gradation.
- Head / Tail light on. Headlight is light bulb color LED.
- Combined head / tail light extinguished dummy board included.
- DCC compatible. Those with 6 pin socket are applicable to M1 · M2. However, it is necessary to change the setting of the CV 29 value of the decoder installed in M \u200b\u200b2, and to reverse the control of head light / tail light.
- By disconnecting the connector cover at the head of the locomotive and using the accompanying combined drawbar, it is possible to compose a 20-car train similar to the actual car at the time of joining two cars.
[Set configuration]
R8 + (No. 8 car) R7 + (No. 9 car) R7 + (No. 9 car) R8 + (No. 3 car) R3 + (No.3 car) R1 + (No. 3 car) R2 + (No. 4 car) R3 + No. 10 car) M2
※ Pantograph (Driver's seat: Direct current / Connection surface parallel: for AC) uses each car in the DC section, only the rear-powered car is used in the AC section.
[Organization Example]
M2 + R1 + R2 ~ R7 + R8 + M1 + M1 + R1 + R2 ~ R7 + R8 + M2
-
Bold : TGV Reseau 10 sets
-
Bold underlined part : TGV Reseau / TGV Duplex (New paint)
※ 2 When joining the organization, please run with one M1 and M2 replaced as above.
[set content]
· M1
· R1
· R2
· R3
· R4
· R5
· R6
· R7
· R8
· M2
[accessories]
- Draw bar for leading connection
- Dummy substrate for turning off light
[Related option parts]
- 11-213 / 214 LED indoor light clear (light bulb color) / (six divided parts)
[Related product]
- 10-1324 TGV Duplex <Duplex> New paint 10 - 1297/1298 Eurostar New paint
( This is a machine translation. Please allow for possible misinterpretations in the text. )