Product Description

- Renewal substation assembly kit, signal station, large building

[Product feature]
- About substation (kit type)
· Model modeling buildings along the electrified section
· Buildings are commonly common gray
· Reproduce truss, insulator, transformer etc
· External wall wire mesh is realistically reproduced with etching parts
· Seals and wire mesh (Etching parts) included

※ Product number 4023 will be discontinued

- About the signal station
· Buildings are commonly found in two gray gray
· Reproduce the control room in a high position overlooking the train on the premises
· Tomics Standard double-line distance can be set to 37 mm
· Seal, fence attached

※ Part number 4024 will be discontinued

- About large buildings
· Gray above the second floor is commonly common
· The middle hierarchy has a unit structure of 2 floors each, base + 1st floor + 2nd floor 3rd floor + 4th floor 5th floor + 6th floor 7th floor + 8th floor 9th floor + 10th floor 11th floor + Assembly structure of roof part
· Seal attached

※ Part number 4045 will be discontinued

[Product Guide]
- Signal station is a place to control train operation by operating points and signals inside the station. Therefore, the control room is in a high position so that the train in the premises can be seen.
- Product base size is adjusted to rail spacing 37 mm. You can also install lighting units.

- set content
Body: 1 piece
Rail runner: 1 runner
Seal: 1 sheet



Item Size/Weight : 18.5 x 7 x 2.7 cm / 39g

Product Specifications

Item series

Structure

Item code

4224

JAN code

4543736042242

Purchase Information