This item is limited to 3 per household.
- Overwhelming power of over 50 cm in width!
- Can be assembled by selecting Bf110D - 3 or Bf110D - 1 / R1!
[About actual machine]
- The German Army's double twin heavy fighter who was active throughout the whole period of World War II is Messerschmitt Bf110.
- In the invasion strategy in the early days of the Great War, he played a great part in supporting the ground troops.
- However, due to bad turnability and so on Battle of Britain struggled in the air against the British fighters such as Spitfire.
- Nevertheless, the night fighter type equipped with radar played an important role in air defense by taking advantage of its speed and fighting down the allied bombers and shooting down.
- The first flight of Bf 110 is May 1936. Troops deployment began in 1939.
- Many types were made by engine and armament changes Bf 110, but it was developed as a long distance type needed for the Norwegian invasion of 1940 and it was developed as a D type fuel tank mounted on a 300 liter wing under 2 In addition to installing it, it was possible to install a drop tank of 900 liters.
- The length of the cruising distance helped to await and attack the Allied military aircraft arriving at night bombing, and it was also advantageous for night battle that two people could support radar and other operations in order to ride.
[About the model]
- The model is a lineup of the Wing Tech series which is easy to assemble.
- A powerful model with a total length of 377 mm, full width 506 mm which reproduced the twin heavy fighter Messerschmitt Bf 110 on 1/32 scale.
- The kit is the first mass production type of D type or D type and also assembled by selecting the D - 1 / R - 1 type equipped with an increasing tank called [Dakkelbauff (Dachshund's belly)] integrated with the lower side of the fuselage Parts are also set as a bonus.
- Externals such as aircraft shape and wing shape, as well as panel lines and rivets are reproduced in detail. Parts of the extended aircraft tail and large tailgroove parts are newly modeled and express the shape firmly.
- In addition, DB 601 engine is modeled precisely in the engine cowl up to the auxiliary equipment.
- In addition, MGFF of the lower part of the fuselage and MG 17 of the nose etc. are reproduced also to the magazine.
- Set of two ETC 500 bombs to be mounted on the fuel tank mounted on the lower surface of the wing and the lower surface of the machine.
- In addition, the cockpit which looks better even after completion with a large canopy is finished with a sense of density, even to instruments panels, equipment, sheets, inner walls and so on.
- Canopy can be assembled by selecting opening and closing.
- I'm also looking forward to wearing skill to detail up only on large models.
- The landing gear is also delicately expressed including the pedestals and the like, and it can be assembled by selecting either the stored state or the landing state.
- It is a kit that looks forward to the sense of density unique to large models.
[Major features]
- Reproduces the twin heavy fighter Messerschmitt Bf 110 on 1/32 scale
- Assemble the D-1 / R-1 type equipped with an increasing tank called "Dakkelbauf (Dachshund's belly)" integrated with the lower side of the fuselage as the first mass production type of D type or D type as a bonus Also set parts
- Finished product size is 377 mm in total length, 506 mm in full width
- Parts of the extended aircraft tail and tail wheel parts of the larger diameter are newly modeled
- Canopy can be assembled by selecting opening and closing
- The landing gear is expressed delicately including the pedestal and the like, it can be assembled by selecting either the stored state or the landing state
- Appearance such as aircraft shape and wing shape, panel lines and rivets are reproduced finely
- MGFF in the lower part of the fuselage and MG 17 in the nose and so on also reproduce the magazine
- In the engine cowl, the DB 601 engine is modeled precisely up to the auxiliary equipment
- ETC 500 bombs to be mounted on the fuel tank mounted on the lower surface of the wing or on the underside of the machine set as well
- Reproduce the cockpit that looks better even after completion with a large canopy to instrument panels, equipment, sheets, inner walls, etc.
( This is a machine translation. Please allow for possible misinterpretations in the text. )