Full length: approx 30cm.
- Selectable from three types of stock specifications, racing specifications, custom specifications and can be assembled!
[About actual vehicle]
- The luxury car released by Chrysler in 1955 is Imperial.
- It was developed as a rival car model of Ford's Lincoln and General Motors' Cadillac.
- The majestic full-sized car body is equipped with a forward look style body by Chrysler's designer, Virgil Exner.
- The engine seemed to be a luxury car and only V type 8 cylinder was loaded.
- Developed into the second generation in 1957.
- The vehicle body width exceeds 80 inches, to 81.7 inches, to 2075 mm.
- With Lincoln and others, it became the largest machine among American cars.
- The 59th year of the 2nd generation boasted the wheel base 129 inches, 3277 mm, the total length 226.3 inches, 5748 mm, the total width 81 inches, 2057 mm. The engine is equipped with 6.4 liters, 6.8 liters, 7.2 liters of V type 8 cylinder.
- There were four body styles of 2-door hard top, convertible, 4-door sedan, hard top.
- It gained high popularity from its luxurious body design and size etc.
[About the model]
- The model is a plastic model assembly kit that reproduced Chrysler's luxury car brand, Imperial's 1959 model on 1/25 scale.
- Modeled the 2-door hard top, the total length of its finish reaches about 22 cm.
- Even in the model its size has enough presence.
- Of course, the distinctive styling of the tail fins is accurately modeled and expresses the atmosphere of that time firmly.
- It is possible to choose to assemble into three types of normal specifications, racing specifications, as well as custom stock specifications.
- In addition, there are plenty of optional parts such as fins, louvers and grills.
- Plating parts are prepared for front grill, bumper, rear bumper and so on, modeling rich reality with distinctive styling.
- A newly designed decal sheet is set, and colors a big size body gorgeously.
- It is a model that you can feel the big American car in the 50's and 60's with that hand.
[Major features]
- Reproduction of Chrysler's luxury car brand, Imperial's 1959 model on 1/25 scale
- Model 2-door hard top
- Selectable from three types of stock specification, racing specification, custom specification and can be assembled
- Styling characteristic of tail fins is accurately modeled
- Various optional parts such as fins, louvers, grills etc.
- Plated parts are available for front grill, bumper, rear bumper, etc.
- Unique styling modeled rich in reality
- Newly designed decal sheet set
- Total length at completion: Approximately 220 mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )