Product Description

Completely new mold
This product is a reproduction of the special edition model [EJ20 Final Edition], of which only 555 units were sold in 2019.

[Structural and Specifications Features]
・1/24 scale. It is a glue-assembly type model kit, characterized by its precise construction that pursues sculptural detail.
- Features a snap-fit design (in some parts) for ease of assembly.
- Each part has a designated adhesive surface for easy assembly.
• Available in 5 molded colors (white, black, silver, gold, and clear)

[Product Features]
- The EJ20 Final Edition, of which only 555 units were sold in 2019, has been commercialized.
- Features of the EJ20 Final Edition are reproduced, including exclusive 19-inch wheels (gold molded) and a rear bumper with an air outlet grille.
- Reproduces the fog light cover shape that is characteristic of the final model (Applied F type). The presence or absence of the LED accessory liner can be selected.
- Large calipers with 6 pistons at the front and 2 pistons at the rear, and drilled disc rotors.
- To increase user-friendliness and flexibility, non-plated parts such as lights, mufflers, and wheels, which are normally plated, are included.

[body]
The hood, front bumper, and rear bumper are all one piece, except for the rear bumper.
The hood is designed as a separate part.
→ Equipped with an opening and closing mechanism.
→The distinctive air intake section is made up of three parts, and the paint scheme is also carefully designed.

[Headlight parts]
It consists of three parts: the main body, the light lens, and the projector lens.
The main body is molded in a silver-plated finish, while the lens is made of clear plastic.

[Front Bumper]
- Parts exclusive to the later model.
The kit consists of 9 parts: front bumper, front under grille, front grille, radiator, fog light covers (right and left), LED accessory liners (right and left), and license plate.
• Designed with consideration for adhesive alignment.
- The front under grille is separated from the front bumper to facilitate painting in different colors.
- The front grille is a separate part with the emblem integrated.
- Radiator parts are separate parts.
- You can choose whether or not to include an accessory liner for the fog light cover.
- LED accessory liner is made of clear parts
- The license plate is a separate part and is a common part with the rear.

- The cowl top panel and wipers are made up of three separate parts.
- The side garnish on the front fender is a separate part.
- Insert into the recess in the body to attach it.

- The front fender duct is a separate part.
- Insert and install from the back of the body.

The side mirror consists of three parts: the main body/base with the mirror integrated, the mirror cover, and the door mirror lamp.
The main body and base are molded in black, the mirror cover is molded in white, and the door mirror lamps are made of clear parts.

The door handle is a separate part, consisting of four components, each with its own specific shape.
- The driver's seat components have keyholes engraved on them.

The rear bumper consists of three parts: the bumper body, rear diffuser, and rear fog lights, with careful consideration given to the paint scheme.
- The rear bumper's air outlet grille area cannot be represented by a recessed mold alone; the grille area will not have an opening.
- The rear fog light section is made of clear parts.

The taillight consists of two parts: the body and the lens.
The main body is molded in a silver-plated finish, and the lens is made of clear plastic.

The distinctive large rear spoiler consists of three parts: the main body and the left and right stays.
- Installation requires drilling holes in the body (φ1.5mm).

[Wind]
- The window parts consist of a three-piece integrated front and side window, and a two-part rear window, which are snap-fit.
• The inside has carvings for different color schemes.
- The rear wiper is a separate part.

[Interior/Interior Design]
The interior parts consist of a base part that integrates the floor and seat cushion, combined with the left and right door trims, and then assembled with two seats (each made of two parts), a shift knob, a handbrake lever, and a center console.
The instrument panel is constructed by combining the hood panel with a multifunction display, the steering wheel, and the car navigation system components.

[Chassis]
- While reproducing the structure of the actual vehicle as closely as possible, it is equipped with EAS (Easy Alignment System), which allows for independent adjustment of ride height and camber angle on all four wheels in addition to the steering mechanism.
In addition to lowering and lifting the vehicle, it can reproduce various changes in vehicle posture, such as during acceleration, braking, and cornering.
[EAS] is a system that allows for the movement and adjustment of three aspects of the suspension: steering, ride height, and camber angle, through a four-wheel independent stepless ride height adjustment mechanism and a four-wheel independent stepless camber adjustment mechanism.

[Engine and Exhaust System]
The distinctive quad exhaust system consists of seven parts: the pipes, the left and right mufflers, and the tail section.
- Silver-plated molded color

[Tires, wheels, and suspension]
- The tires are newly manufactured specifically for this model. The rubber material is used to reproduce the texture of the real thing.
The wheels feature a unique design and are molded in a gold-plated finish.
- The brakes are designed separately for the front and rear.
The brake calipers are 6-piston for the front and 2-piston for the rear.
- The disc rotor replicates a drilled disc.
- Silver-plated molded color

[Decal]
Includes emblems, STI logos, cherry red lines, gauges, wheel caps, etc.

[Included Contents]
• Runners x 17, • Rubber tires x 4, • Assembly instructions x 1, • Decals x 1, • Masking stickers x 1



Item Size/Weight : 34.7 x 20.5 x 9 cm / 477g

Product Specifications

Item series

Inch Up

Car manufacturer

Subaru

Item code

048383

JAN code

4968728048383

Purchase Information