Full length: approx 80mm.
-One unit that realistically reproduces the exceptionally unique mechanism of eight-wheel drive eight-wheel steering and all-wheel independent suspension!
[About the actual vehicle]
-Sd.Kfz.231 in Germany is a wheeled armored car with an elaborate mechanism of eight-wheel drive, eight-wheel steering and all-wheel independent suspension.
-Production started in 1936 by Beaucing NAG.
-Equipped with a unique shaped armored hull and turret in a complex mechanism chassis. The cockpit was also installed in front and rear of the vehicle body, allowing the driver to drive in either direction without changing direction.
-The Sd.Kfz.231 was developed as an armored reconnaissance vehicle with a turret equipped with the KwK30 and MG34 machine guns with a 55-caliber 2cm cannon, but various types using its hull were also created.
-One of them is the Sd.Kfz.232, which has a radio, and features a Fu.12 radio mounted inside the car, a pillar on the hull and turret, and a large frame antenna.
[About kit]
-The model is a plastic model assembly kit that reproduces an 8-wheel Sd.Kfz.232 armored radio vehicle developed and deployed by the German Army in World War II on a 1/72 scale.
-The upper and lower hulls, the octagonal turret, and the left and right fenders are realistically reproduced using slide dies.
-The shape of the frame antenna mounted on the vehicle body is also reproduced with separate parts. A unique figure cannot be overlooked.
-In addition, the eight-wheel mechanism is a three-dimensional model of the suspension arm and leaf spring of the double wishbone with separate parts. You can enjoy a mechanical and dense finish.
-The finished model with a total length of about 8 cm has a lot of highlights from the body shape to the mechanism under the chassis.
-The model that gives off a distinctive color is one that is full of individuality even if the mechanism and shape are 1/72.
[Major features]
-Reproduced 8-wheel Sd.Kfz.232 armored radio vehicle developed and deployed by the German Army in World War II on 1/72 scale
-The upper and lower hulls, the octagonal turret, and the left and right fenders are realistically reproduced using sliding dies.
-The frame antenna mounted on the vehicle body also reproduces its shape with separate parts
-Eight-wheel mechanism is a three-dimensional model of the double wishbone suspension arm and leaf spring with separate parts
( This is a machine translation. Please allow for possible misinterpretations in the text. )